Step 2: Start Prime95
After starting the Prime95 torture test highlight the Prime95 tray icon—all cores should
say “self-test”, if it shows “not working” that means that specific core has failed to pass
the test. Another form of failing the stability test is that your system may simply just
reboot or freeze, which means your settings were too aggressive and your CPU has failed
the stability test. We normally test Prime95 for 1 hour. This duration can be increased for
more assurance.
Step 3a (Fail): Close Prime95
Close Prime95 by right clicking the Prime95 icon on the tray bar in the lower right side of
your screen and selecting “Exit”. This closes Prime95.
Step 3b (Fail): Adjust Frequency or Voltage
Now it’s time to adjust your frequency or voltage settings. You can do this either through
the BIOS or using EasyTune which is available through the GIGABYTE App Center. You
have two options: Either increase CPU Vcore or decrease “CPU Clock Control”. We
recommend you to stay under 95° C on your CPU along with a CPU Vcore below 1.35
volts if possible. After making adjustments go back to Step 1. If it continues to fail dial
down your “CPU Clock Control” until you pass stability testing.
9