X299 OC Guide Kabylake Kabylake - Page 17

Chapter 3: Stability Testing Congratulations! You are now running at 5.1GHz, which is nothing to scoff at. Now it’s time make sure that it’s stable. We’re going to use the software below to monitor our system, test stability, and adjust our overclocks. Prime95 Version 27.9 Build 1 This is used to stress test our CPU in order to ensure that it’s stable in the most taxing of conditions. This particular version of Prime95 uses AVX instructions which push our CPU to the absolute max. CPU-Z - Used to monitor our CPU frequencies and Vcore settings. CoreTemp - Used to monitor idle, load, and loading temperatures. How to Stability Test Step 1: Open up CPU-Z, CoreTemp, and Prime95. Make sure Prime95 is configured. Click Custom, change “Min FFT size (in K):” to 1344, and change “Max FFT size (in K):” to 1344, then check “Run FFTs in-place” and then press OK to start. Step 2: Start Prime95 and look at “CPU Load” in the CoreTemp app. If one of your cores is not at 100%, your system gets the blue screen of death or just freezes, that means your settings were too aggressive and your CPU has failed the stability test. We normally test for 1 hour. You can keep it running overnight for increased assurance. 16