All of our Products are
Proudly Made in the USA
Toll FREE CUSTOMER SUPPORT 1.866.642.2832
All wafers are scanned to determine wafer positions prior to operation. This
information is then relayed to the software for the operator to control and
displayed via the user interface. Once scanned in, each wafer is available for
selection or specific processes. 5 different user selected modes will determine which stages of the machine the wafer will interact with.
The flat/notch alignment stage of our Automatic Programmable Wafer Microscope Loader allows users to find their
flat/notch before microscope inspection. The position is first
selected (3, 6, 9, or 12 o’clock). The non-contact wafer tray arm
then transfers and positions the desired wafer onto the flat/
notch aligner. Wafer is then rotated to desired position before
being transferred to the next stage.
Prior to inspection, the wafer tray arm will locate and transfer the desired wafer to be inspected. This can be with or without flat/notch
alignment first. Once seated securely, the user may slide the entire platform gently under the microscope to be inspected. Once inspection is
complete, the platform is gently slid back activating the wafer tray arm
to retreive and return the wafer.
Customization and Installation available on all G2 Products
Product Specifications and Appearances Are Subject To Change Without Notice
www.G2AutomatedTechnologies.com
23