Vendor Door Catalogs Turnglass Poly-Classic Columns | Page 3

FRP Turncraft Exclusives Products TIMESAVER CAP AND BASE New to the Turncraft product line, our 8” Square TimeSaver Cap and Base employs the same QuickFit installation pressure tabs as our round 8”, 10”, and 12” TimeSaver products. Our TimeSaver cap and base offers the easiest and quickest installation in the industry. • Patent pending pressure tabs • Made out of fiber-reinforced recycled ABS (acrylonitrile butadiene styrene) • Designed for use on round FRP columns in 8”, 10”, and 12” sizes • Made with 95% recycled material • Extremely strong and durable • Self aligning with no fasteners • Excellent paint adhesion • Fast installation TIMESAVER R AILING ADAPTER BR ACKET Our TimeSaver railing adapter bracket solves the age old problem of attaching a railing system to the decorative base of a round column. Simply use one of these new brackets to make an attractive attachment to our 8”, 10”, and 12” round Tuscan bases. Brackets are available in two different heights, allowing them to be used with just about any railing system on the market. Patent pending pressure tabs NEW! COPPER OR ALUMINUM FLASHING Turncraft is now offering real flashing for our most popular sizes of columns - the 8", 10", and 12" round and square Poly-Classic® FRP columns with Tuscan caps. Flashing is available in either copper or aluminum. Flashing is 3/4" larger than abacus size, to be folded over the edges of the cap, held in place with Crimp edges of flashing over sides of cap. construction Secure in place with construction adhesive. adhesive (not supplied). Flashing for other sizes and styles of caps are available. Call for more information. Installation Kits Available INSTALL KIT For structural FRP columns, the install kit consists of 4 ABS brackets (2 for top of column and 2 for bottom) and fasteners required for standard installation. We recommend 2 kits for columns 16" and up: this will allow the installer to use 4 brackets at the top and bottom of the column. When installed, the cap and base will conceal these brackets and hardware. SPLIT KIT Each kit contains six nylon locking straps with 1/8” spacers and one quart (1.85 lb.) automotive body filler. For columns over 12 foot in height, two kits will be required per column. Turncraft recommends using an abrasive (Carborundum or similar) or carbide blade to trim the shaft. Split columns are not load bearing. 12 | 800 | 800 423 3311 • www.turncraft.com 423 3311