PRE-HUNG OPTION & ADVANTAGES
Sill and Sill Color Options
All standard pre-hung exterior door units use adjustable composite sills that help prevent water penetration , rotting , warping , and discoloration . Our standard adjustable composite sill includes a peel-off film which protects the sill during construction , and is made from 100 % composite materials . The “ adjustable ” feature allows the top of the sill to be adjusted with a screwdriver to match the correct height required for the bottom of the door . Optionally , you may select the Endura ® Brand adjustable composite threshold ( for an extra charge ) that is made from composite and aluminum material or an ADA aluminum threshold . The ADA threshold is approved for use with wheelchairs . ADA sills are 5 ” x ½ ” or 7 ” x ½ ”. The Endura Z-Series sill system provides a walnut colored sill cap , the adjustable feature , and a hard plastic , protective construction cover .
Bronze Composite finish
Bronze Aluminum finish
Mill Composite finish
Mill Aluminum finish
STANDARD SILL with Composite substrate that will not warp or rot . Available in both Bronze ( shown here ) and Mill finishes .
OPTIONAL ENDURA brand threshold is available in Bronze Aluminum and Mill Aluminum ( shown here ) finishes , and includes a removable hard protective construction cover .
OPTIONAL ADA threshold is available in the Mill Aluminum finish only .
Composite Door Frames with STRIKEJAMB™
All FiberCraft pre-hung doors are available with a steel-reinforcement StrikeJamb™ as an option . Pre-hung units include jamb legs , T-astragal ( for double doors ), standard sill , header , weatherstripping , and adjustable threshold , plus 3 ball-bearing hinges on 6 ’ 8 ” tall doors and 4 ball-bearing hinges on 8 ’ 0 ” tall doors .
The StrikeJamb™ reinforcement can be installed on the lock side jamb leg for safety and security . This plate reinforces the jamb leg , and allows the dead bolt and the handleset bolt to throw so that the bolts extend through the corresponding holes in the steel reinforcement plates . In addition , long mounting screws should be used with this StrikeJamb , these screws extending through the jamb leg , then through the steel plate , and finally into the wall studs .
Image at right shows the reinforcing plate from the back jamb leg side , which is hidden from view after installation .
Hinge Color Options
Oil-Rubbed Bronze Satin Nickel
Flat Black Choose from these three hinge color options for your pre-hung entry door .
All pre-hung 6 ’ -8” tall units use three 4-inch ballbearing hinges , while 8 ’ -0” tall units use four hinges . Choose from the three hinge color options shown at left for your pre-hung entry door unit : Oil Rubbed Bronze , Satin Nickel or Flat Black .
16