1
REAMER FOR CLEANING
Glow plug puller for CDI engines
Glow plug vibration extractor set
• Ideal for unscrewed, but firmly seated glow plugs
• Can be used universally for M10 glow plugs
• Reaches into the electrical connection of the glow plugs
with the support sleeve or impact hammer the glow plug is
removed
• Easy to fit
• Safe to use
• No sharp edges
• Saves a lot of time
• Special steel
• Ideal for loosening and extracting jammed glow plugs
• Especially suitable in glow plugs jammed by corrosion and/
or soot coal
• Produces controlled vibration impulse
• Suitable for all current glow plugs
• Loosening torque in 4 stages in accordance with manufacturer guidelines
• Extensive cost intensive repairs can be avoided through
dismantling glow plugs
• Includes 1/4” coupling connector
• In durable steel storage case
Application range: Mercedes CDI engines OM 611, 612, 613,
646 (excluding 646 EVO), 647, 648, etc.
2
3 in 1 glow plug reamer M8 x 1.0
3
• Special reamer geometry cleans the glow plug shaft, sealing
seat and glow rod channel in a single step
• For professional cleaning of glow plug channels in the cylinder
head of sizes M8 x 1.0
• Removes deposits between the glow plugs and cylinder head
• Damage due to deep penetration and slipping of the reamer is
prevented by fixable stoppers
• Includes a centring sleeve with thread of the corresponding
glow plug
• Prior to fitting new glow plugs it is recommended to clean the
glow plug shafts
• Universal usage
• External hexagon drive 10.0 mm with milled manual drive
head
• Multi-level reamer made out of one piece
Application range: For all vehicles with glow plugs of sizes
M8 x 1.0
4
5
6
7
8
9
10
mm
152.1121
152.1096
10,0
133.0
M8x1,0
10
195.0
230
280
11
3 in 1 glow plug reamer M9 x 1.0
• Special reamer geometry cleans the glow plug shaft, sealing
seat and glow rod channel in a single step
• For professional cleaning of glow plug channels in the cylinder
head of sizes M9 x 1.0
• Removes deposits between the glow plugs and cylinder head
• Damage due to deep penetration and slipping of the reamer is
prevented by fixable stoppers
• Includes a centring sleeve with thread of the corresponding
glow plug
• Prior to fitting new glow plugs it is recommended to clean the
glow plug shafts
• Universal usage
• External hexagon drive 17.0 mm with milled manual drive
head
• Multi-level reamer made out of one piece
Glow plug service set
• For removing the glow plugs from the glow plug channel in the
cylinder head
• Reamer for cleaning the glow plug channel in the cylinder
head
• Removes deposits and carbonisation between glow plug and
cylinder head
• Can be used for glow plugs jammed by corrosion and/or soot
coal
• In durable plastic storage case
Application range: Reamer M10 x 1.00: Mercedes 4, 5
and 6 cylinder CDI engines, Smart CDI (660) reamer M12 x
1.25: Mercedes 4 valve technology engines (OM604/605/606)
glow plug puller: Glow plugs 10.0 mm e.g. Mercedes CDI (OM
611/612/613)
Technical data:
Square drive:
1/4”
Max. tightening torque:
40 Nm
Max. loosening torque:
1 = 10 Nm
Application range: For all vehicles with glow plugs of sizes
M9 x 1.0
2 = 20 Nm
3 = 30 Nm
4 = 40 Nm
No load current:
< 2,69 ms²
Noise performance level:
88 dbA
Recomended torque:
42 Nm
Air consumption:
128 l/min
Operating pressure:
M16
Min. tube diameter:
3/8” - 10 mm
Connection thread:
1/4”PT
17
mm
152.1122
M9x1,0
17
200.0
18
230
3 in 1 glow plug reamer M10 x 1.0
152.1060 5 pcs
Glow plug vibration extractor set
1.80
consists of:
152.1061 1/4” Vibration extractor 10-40 N•m
900
152.1062 1/4” Impact wrench socket long 8 mm
30
152.1063 1/4” Impact wrench socket long 10 mm
40
152.1064 1/4” Impact wrench socket long 12 mm
50
152.1065 1/4” Universal joint
40
• Special reamer geometry cleans the glow plug shaft, sealing
seat and glow rod channel in a single step
• For professional cleaning of glow plug channels in the cylinder
head of sizes M10 x 1.0
• Removes deposits between the glow plugs and cylinder head
• Damage due to deep penetration and slipping of the ɕ