STANDARD INSTALLATION DETAILING FOR SAFLOK700
Sa
t
SL 700 Clip
Purlin
Column
*NEVER re-use a Saflok 700 clip
Step 1
F i x t h e f i rst S A F LO K - 7 0 0 c l i p s
perpendicular to the gutter in a straight
line on the edge first sheet to ensure
straightness. Care should be taken to
ensure that the overlap is facing away from
the prevailing weather.
Step 2
Locate the first sheet above the clips
ensuring that the overhang into the gutter
is correct. Push downwards on the
SAFLOK-700 sheet until the decking is
secured at every clip. Do not use excessive
force.
Step 3
Lap the next SAFLOK-700 clip over the top
of the male rib.
Step 4
The holes on the existing and new clip will
align and hook into place on the self
locating tabs. Fasten this section first and
fix the remaining two holes as previously.
Fasten all clips in this manner.
Step 5
Lay the next SAFLOK 700 sheet. Inspections
should be made periodically to ensure the
decking is installed squarely. This can be
done by comparing the coverage at the
ridge and gutter line. At the end of the
purlins cut the deck and clip to suit.
Step 6
Locate the next sheet above the clips
ensuring that the overhang into the gutter
is correct. Proceed as from Step 2.
32