Trend Routing & Woodworking Catalogue April 2016 | Page 213
Allows Varijig clamp guide to be
squared up for maximum accuracy.
l Large 90º head allows clamp to be
used as a clamping T-square.
l Serrated front edge.
l Includes fixing screws.
Lever extension handle for Varijig
clamp guides.
l Gives better leverage to operate
the clamp, especially when more
clamping pressure is required.
l Increases lever length by 134mm.
CLAMPING
HANDLE EXTENSION
SQUARING
ATTACHMENT
VJS/CG/EXT £5.89
VJS/CG/SQA £10.18
WIDE JAW KIT
Pair of plastic jaws for fitting onto
the jaws of the Varijig clamp guides.
l Distributes clamping pressure over
the workpiece to minimise clamping
marks.
l Built-in mounting holes allow a
batten to be fitted.
l Includes fixing screws.
VJS/CG/WJK £6.96
ADJUSTABLE
SETTING GUIDE &
STOP
Short alloy extrusion rail can be
fixed anywhere along length of
Varijig clamp guide. Limits rail
travel to a set position from edge.
l Ideal for repetitive grooves.
l Removable alloy adjustable bridge
guide stop can be locked in place.
l Bridge travel is 176mm.
l Can be used as a length stop.
VJS/CG/AGS £13.94
SIDE-TO-SIDE CLIPS
Allows two Varijig clamp guides to join
side-to-side to clamp workpiece to
workbench, obstruction free.
l Clamp one guide to the bench and
attach another clamp upside down.
l Two clamps joined together creates a
112mm wide component support surface
which is ideal for sanding.
l Six adapters are included so three
pairs of clamps can be linked securely
together.
FEATHER BOARD
Feather board finger pressure
accessory.
l Clamps to the Varijig clamp guide
which can then be easily clamped to a
router table top.
l Provides horizontal side pressure.
l Includes fixing kit.
VJS/CG/FB £10.18
VJS/CG/SSC £13.94
6 pack
T11 VARIJIG
CLAMP GUIDE KIT
Allows T11 Router to be connected to
the Varijig clamp guides.
l Comprises alloy bracket fixing and
plastic slider.
l Adjustment facility to make router nearer
or further away from guide to allow wider
slots and trenches to be routed.
l
Alloy bracket is bolted to T11 base.
BACK-TO-BACK CLIPS
Allows two Varijig clamp guides to be
joined back to back.
l Clips comprise of alloy brackets and
knobs.
l Raises component by 32mm for
unobtrusive clamping especially for full
edge mould work.
VJS/CG/BBC £10.72
8 pack
T11/VJS/CGKIT £40.59
All prices are exclusive of VAT
Router & cutters not included.
211