Trend Routing & Woodworking Catalogue April 2016 | Page 183
TIMBER REPAIR KIT
TEMPLATE
A unique concept which allows oval pockets to be routed to disguise ugly resin
pockets and knots in timber. This is especially required when softwoods are being
used. The template is supplied with a 10mm diameter 1/4” shank cutter, a 20mm
template guide bush and a 40mm inlay collar. A Unibase may be required for certain
makes & models of router. Patch size 120mm x 45mm.
A template to rout holes of various diameters and to put a concave or convex
shape on the component. A template profiler cutter can be used to create
holes of 25mm, 50mm, 75mm and 100mm in diameter. The template edge also
includes concave and convex 50mm and 100mm radius profiles. A variety of
other size holes and curves can be achieved by using a different
combination of cutter and guide bush. A Unibase may be
required for certain makes and models of router.
TEMP/TRKX1/4 £43.03
Size: 400 x 180 x 8mm
TEMP/COR/A £43.03
Size: 290 x 290 x 8mm
After
Before
CABLE TIDY INSERT
TEMPLATE
A template that enables 60mm and 80mm round and 105mm x 55mm rectangular
holes to be routed in desks or any surface where cables need to be hidden. The
holes will then accept a plastic cable tidy. The template can also be used to cut
a 35mm blind hole for circular kitchen door hinges. A 30mm
diameter guide bush and a 12mm diameter cutter are required.
A Unibase may be required for certain makes and models of
router.
TEMP/CTI/A £35.75
ROUTING ACCESSORIES
CORNER / HOLE
TEMPLATE
REPLACEMENT PARTS: Product Ref.
Price
Spare guide bush 20mmØ
Collar 20mm - 40mmØ
GB20
GB/COLL/2040
£7.96
£6.12
Router cutters
Trade Range 10mmØ
CraftPro 10mmØ
TR09X1/4TC
C016X1/4TC
£18.80
£13.73
FRAME & PLAQUE
TEMPLATE SET
Size: 325 x 290 x 8mm
A seven piece template set that allows elliptical picture frames and plaques/plinths
to be routed. Made from clear 8mm thick laser cut plastic. The four picture frame
templates and three plaque templates are supplied with pinholes so that they can be
secured to the component, or alternatively they can be secured with hot melt glue
or double-sided sticky tape. Use with a bearing guided 12.7mm diameter template
profiler or laminate trimming router cutter, in a router table or portable use.
Back of frame requires 12.7mm guided rebate cutter.
TEMP/PFP/A £33.33
CABLE TIDY INSERTS
Three sizes of two part ABS plastic inserts enabling the tidy ducting of computer,
telephone and audio cables, through desktops, cabinets and shelving units. The
60mm and 80mm inserts have a spring loaded swivel cover plate. Cover plates
can be removed to allow plugs to pass through. The rectangle insert has four cable
apertures and a ribbon slot.
CTI/60/PK1 (3 off) _ £7.96
CTI/80/PK2 (3 off) __ £10.96
CTI/60/PK2 (3 off) __ £7.96
CTI/80/PK3 (3 off) __ £10.96
CTI/60/PK3 (3 off) __ £7.96
CTI/105/PK1 (3 off) __ £9.12
CTI/80/PK1 (3 off) _ £10.96
CTI/105/PK3 (3 off) __ £9.12
60mm dia. - light grey
60mm dia. - brown
60mm dia. - black
80mm dia. - light grey
Plaque Sizes:
3” x 2”
5” x 3-1⁄2”
5-29⁄32” x 4-3⁄8”*
*These two templates are used to create the backs of
the three picture frames 7” x 9”, 5” x 7” and 3-1⁄2” x 5”.
80mm dia. insert - brown
80mm dia. insert - black
105 x 55mm dia. - grey
105 x 55mm - black
ACCESSORIES:
Sizes stated are routed hole size in board.
Frame Sizes:
7” x 9”
5” x 7”
3-1⁄2” x 5”
6-29⁄32” x 8-29⁄32”*
Product Ref.
Router cutters 12mmØ
Professional
3/8LX1/4TC
Professional
3/73X1/2TC
CraftPro
C019AX1/4TC
CraftPro
C200DX1/2TC
Guide bush 30mmØ GB30
Measurements shown are: Length x Width x Thickness.
Price
£26.41
£34.60
£17.65
£22.48
£7.96
Routers and cutters not included with all templates.
181