Trend Routing & Woodworking Catalogue April 2016 | Page 104
CRAFTPRO ROUTER CUTTERS
TCT
TUNGSTEN
CARBIDE
TIPPED
PROFILE SCRIBING
TOOLING
BEARING GUIDED COMBINATION
OGEE PROFILE SCRIBER
COMBINATION & EASYSET
Cut both parts of the joint by re-assembly of the tool.
The classic method of producing cabinet panelled door and
drawer fronts is made easy with these Profile Scriber sets.
l With the combination type, components are re-arranged on
the arbor to cut the profile or the scribe.
l The Easyset system works by altering the height of the cutter.
l
Stile
(face side up)
Stile/rail
(face down)
Both ends of
each rail
One edge of
each stile & rail
Using Profile Scriber
& Panel Cutters
Instructions
supplied
Router table use only. 1/4” and 8mm shanks should only be used with a medium or
heavy duty router. For certain routers the aperture in the base may need to be enlarged.
A workholding device should be used when cutting the scribe cut on the rail ends. The
18,000 cutting edges should be staggered to each other. When using Easyset cutters, take
several passes. When using these sets at the minimum material thickness, the height of
the top quirk may be reduced.
!
Depth
of
cut
BEARING GUIDED EASYSET
OGEE PROFILE SCRIBER
Cuts both parts of the joint by only changing
the cutter height. No re-assembly of the tool is
required so saving time.
Cutter shown 80%
of actual size.
R4
C
R
!
Cutter shown 80%
of actual size.
Min. 18.0mm
Max. 22.0mm
R4
Product
Ref.
4.0 41.0 17.0 6.35 22.0
C149
D
mm
C
mm
C2
mm
C
mm
C2
mm
Shank Diameter
1/4”
1/2”
£52.13
£52.13
BEARING GUIDED COMBINATION
BEVEL PROFILE SCRIBER
D
R
Timber thickness mm
Min. 18.0mm
Max. 22.0mm
B
mm
C
R
B
!
D
R
D
Timber thickness mm
mm
C2
C2
B Product
mm Ref.
Cut both parts of the joint by
re-assembly of the tool.
Shank Diameter
8mm
12mm
1/2”
4.0 41.0 17.0 6.35 22.0 C155 £73.35 £73.35 £73.35
BEARING GUIDED EASYSET
BEVEL PROFILE SCRIBER
Cuts both parts of the joint by only changing
the cutter height. No re-assembly of the tool is
required so saving time.
Cutter shown 80%
of actual size.
10°
A
C
B
!
Cutter shown 80%
of actual size.
10°
!
Timber thickness
Min. 18.0mm
Max. 22.0mm
SPARE PARTS
Profile block
Groover
Bearing
Arbor
Arbor
Spare spacer set
102
D
D
C
C2
B Product
Shank Diameter
Timber thickness A mm
mm
mm mm
Ref.
1/4”
8mm
1/2”
Min. 18.0mm
10°
41.0
17.0
6.35
22.0
C157
£52.13
£52.13
£52.13
Max. 22.0mm
C2
A
BEARING GUIDED COMBINATION
FLAT CLASSIC PROFILE SCRIBER
C
B
A
D
D
mm
C
mm
C2
C2
mm
B
mm
Product
Ref.
10° 41.0 17.0 6.35 22.0 C204
for C149 & C155
for C1