STEP 4:
Connect the LED resistor from the
positive leg of the LED to BOTH positive
DC lugs. Thread it right through but only
solder ONE of the lugs, leaving the other
unsoldered.
STEP 5:
Connect the 4.7m resistor from switch lug
5 to any ground point, I chose lug 1 on
the switch. Solder the ground point, but
NOT lug 5.
STEP 6:
Your potentiometers have tiny metal
tabs on them that keep them from
mounting properly. Snap them off with
pliers, then mount the potentiometers,
switch, and thusly both main board and
transformer daughterboard. I secured
my transformer board with double sided
foam mounting tape.
50
DIY //
Build Your Own Tychobrahe Octavia