YOU’LL NEED THE
FOLLOWING PARTS
RESISTORS:
Potentiometers:
Neither I, nor Tone
Report Weekly bears any
responsibility for any kind
of personal or property
damage that may occur as
a result of the instructions
provided herein. Legal
mumbo-jumbo aside,
we ask that readers be
familiar with a soldering
iron and its accompanying
safety procedures before
trying anything listed
here. Furthermore, if you
fire the pedal up and it
does not work, it will need
troubleshooting. Assuming
the components are not
damaged, the pedal will
work. I built this very
unit according to these
instructions and it fired up,
first shot, so I know the
instructions are correct.
OK? Let’s build this thing!
24
24
1x 1k
1x 18k
1x 150k
2x 56k
CAPACITORS:
1x 50pF (ceramic)
1x 500pF (ceramic)
1x 22nF (0.022uF, film)
1x 68nF (0.068uF, film)
1x 100nF (0.1uF, film)
SEMICONDUCTORS:
1x 2N2222A
1x 2N2907A
2x 1N4148
2x BAT41
POTENTIOMETERST:
2x 100kA (logarithmic taper)
1x 100kB (linear taper)
MISCELLANEOUS:
1x piece of stripboard (Veroboard) cut to
spec (the kit includes the uncut board)
1x on-off-on SPDT toggle switch
1x toggle switch cover (optional)
3x potentiometer dust caps (optional but
recommended, included)
2x transistor sockets (sold as SIP sockets,
optional but recommended)
Wire
DIY
// TALK
Radioactive
Tone: Build
Your of Own
Modified
Jordan
TONE
//
Secret
Weapons
the Tone
Report
Staff Boss Tone