76 • AUTOLOCKSMITHS
PROUD SPONSORS
OF THIS PAGE
STEP BY STEP GUIDE TO KEYPROGRAMMING
» » HICKLEYS, THE SPECIALISTS IN
vehicle key programming detail the
necessary steps required to complete
the key programming on a 2009 ON Fiat
Doblo with a ZFA263 chassis. The vehicle
uses an id46 transponder with precoded
1
data requires a security pincode to access
the programming section of the vehicles
on board electronics.
It is possible to program a genuine
dealer remote key ordered by vin
number or just a bladed key. When using
a dealer key it comes precoded and is
not necessary to obtain the precode
information, on all other applications it
will be necessary to write the precoding
data to the new transponder before
programming.
Select Fiat,
Europe, Doblo
, +263, +2009-
>, Immobiliser.
First you need
to pre-code the
transponder.
In this example we will be using the
Advanced Diagnostics MVPPRo with the
Smart Dongle (ADC240) and the Smart
Aerial (ADC242).
OVERVIEW
• Fiat Doblo 2009 onwards ZFA263
chassis
• Precoded ID46 remote/
transponder.
• Hickleys reference AKK317 Non
remote key with a PCF7936.
2
Follow the on screen instructions.
3
4
Select program key, the next stage you will have two options,
as we are not programming a dealer key select the tick.
5
The pincode will be displayed.
6
Insert the blank transponder into the smart aerial to pre-code.
7
At this stadge only the new transponder is pre-coded
any original keys will still start the vehicle.
8
Following the MVPPRo you must have all keys present.
9
As there are original keys select the tick.
10
Once ALL keys are programmed select the cross.
All keys programmed press enter key and back
out to the main vehicle selection screen.
LOCKSMITHJOURNAL.CO.UK | SEP/OCT 2017
Sponsored by Aldridge Security