Maintenance and service / Fuses
11-39
If any lights , accessories or other electrical controls do not operate , inspect the corresponding fuse . If a fuse has blown , replace it .
1 . Turn the ignition switch to the “ LOCK ”/ “ OFF ” position and turn off all electrical accessories .
2 . Remove the fuse box cover .
3 . Determine which fuse may be blown . Look at the back side of each fuse box cover and refer to “ Fuses and circuits ” F12-10 .
The other one ( main fuse box ) is housed in the engine compartment .
The fuse puller is stored in the main fuse box in the engine compartment . To pick up the fuse puller , pull it out while pinching the puller head with your fingers .
1 ) Spare fuses
The spare fuses are stored in the main fuse box cover in the engine compartment .
4 . Pull out the fuse with the fuse puller .
5 . Inspect the fuse . If it has blown , replace it with a spare fuse of the same rating .
6 . If the same fuse blows again , this indicates that its system has a problem .
– CONTINUED –