Maintenance and service/Battery replacement
same or equivalent type of the
battery.
. Batteries should not be exposed
to excessive heat such as bright
sunlight, fire or the like.
11-45
& Replacing access key battery
Battery: Button battery CR1632
NOTE
. Replace only with the same or
equivalent type of battery recommended by the manufacturer.
. Dispose of used batteries according
to local laws.
. Mount the battery in the correct
orientation to prevent fluid leakage.
Be careful not to bend the terminals. It
may result in a malfunction.
. It is recommended that the battery
should be replaced by a SUBARU
dealer.
. Use a new battery.
. After replacing the battery, confirm
that the access key/transmitter functions properly.
1. Pull out the mechanical key.
2. Insert the key into the gap and turn it
clockwise to remove the cover.
3. Wrap a flat-head screwdriver with
insulating tape, and insert it between the
battery and the board. Then pry it out from
the board.
4. Insert a new battery with its positive (+)
side facing upward as shown in the
– CONTINUED –