Maintenance and service/Replacement of wiper blades
grooves in the rubber and slide the blade
rubber assembly into the support until it
locks.
1)
11-35
& Rear window wiper blade
assembly
1. Raise the wiper arm off the rear
window.
Metal spines
2. If the new blade rubber is not provided
with two metal spines, remove the metal
spines from the old blade rubber and
install them in the new blade rubber.
1)
2)
Claw
Stopper
4. Be sure to position the claws at the
end of the support between the stoppers
on the rubber as shown. If the rubber is
not retained properly, the wiper blade may
scratch the windshield.
2. Turn the wiper blade assembly counterclockwise.
3. Align the claws of the support with the
– CONTINUED –