1-16
Seat, seatbelt and SRS airbags/Seatbelts
strong pull, then pull it out slowly again.
on your hips, not on your waist.
! Adjusting the front seat shoulder
belt anchor height
WARNING
When wearing the seatbelts, make
sure the shoulder portion of the
webbing does not pass over your
neck. If it does, adjust the seatbelt
anchor to a lower position. Placing
the shoulder belt over the neck may
result in neck injury during sudden
braking or in a collision.
! Unfastening the seatbelt
4. Insert the tongue plate into the buckle
until you hear a click.
The shoulder belt anchor height should be
adjusted to the position best suited for the
driver/front passenger. Always adjust the
anchor height so that the shoulder belt
passes over the middle of the shoulder
without touching the neck.
To raise:
Slide the anchor up.
To lower:
Pull the release knob and slide the anchor
down.
5. To make the lap part tight, pull up on
the shoulder belt.
6. Place the lap belt as low as possible
Pull down on the anchor to make sure that
it is locked in place.
Push the button on the buckle.
Before closing the door, make sure that
the belts are retracted properly to avoid
catching the belt webbing in the door.