Audio/Hands–free system
! Preparation for using the Handsfree system
! When no cell phones are registered
Before using the Hands-free system, it is
necessary to register a cell phone in the
system. Perform the following procedure
to register a cell phone.
1. Press the OFF hook switch
.
2. Select “ENGLISH”/“FRANÇAIS” by
operating the “TUNE/TRACK” dial.
3. Press the “TUNE/TRACK” dial when
the language of your choice is displayed.
– “WELCOME!” will be displayed.
– Voice prompts will now begin to
help guide you through the pairing
process.
4. Press the “TUNE/TRACK” dial or the
talk switch
to begin the pairing
process.
5. Perform either of the following procedures.
– Select the “RECORD NAME” menu
by using the “TUNE/TRACK” dial or
– Press the talk switch
located on
the steering wheel.
6. Say the name (voice tag) to be
registered.
7. Press the talk switch
and say the
word “Confirm” to confirm the recorded
name.
– Go to your phone’s setting menu
and access the Bluetooth device
menu.
– Scan for available Bluetooth devices.
– “CAR M_MEDIA” should be displayed on your phone as an available
device. Select this device.
– After “CAR M_MEDIA” is selected,
a pass key will be displayed.
8. Input the displayed pass key from the
radio into the cell phone while “PKY: ****”
is displayed on the radio.
– If you input the correct pass key,
“PAIRED” will be displayed and the
registration procedure will be finished.
– If you input an incorrect pass key,
“FAILED” will be displayed and the
registration procedure will not be
successful.
! Registering a cell phone
To register a cell phone to the in-vehicle
equipment, perform the following procedure.
1. Select the “SETUP” menu.
2. Select the “PHONE SETUP” menu.
3. Select the “PAIR PHONE” menu.
4. Perform either of the following procedures.
5-51
– Select the “RECORD NAME”
menu.
– Press the talk switch
.
5. Say the name (voice tag) to be
registered.
6. Select the “CONFIRM” menu.
– After “CAR M_MEDIA” is displayed,
a pass key will be displayed.
7. Input the displayed pass key into the
cell phone while “PKY: ****” is displayed.
– If you input the correct pass key,
“PAIRED” will be displayed and the
registration procedure will be finished.
– If you input an incorrect pass key,
“FAILED” will be displayed and the
registration procedure will not be
successful.
! Selecting a cell phone
To select the registered cell phone for
connecting to the in-vehicle equipment,
perform the following procedure.
1. Select the “SETUP” menu.
2. Select the “PHONE SETUP” menu.
3. Select the “SELECT PHONE” menu.
– If no cell phones are registered,
“EMPTY” will be displayed and the
mode will change to the “PHONE
SETUP” mode.
4. Select the cell phone by performing
– CONTINUED –