5-24
Audio/CD player operation
upward beginning with the track following
the currently selected one.
After all tracks on the disc/in the folder
have been scanned, normal playback will
be resumed. To cancel the scan mode,
press the “SCAN” button again.
NOTE
. The scan mode will be cancelled if
you perform any of the following steps.
– Press the “RPT” button.
– Press the “RDM” button.
– Turn the “TRACK” dial.
– Press the “ ” or “ ” side of the
“FOLDER” button (only when an
MP3/WMA/AAC track is playing).
” or “
” side of
– Press the “
the “TRACK/SEEK” button.
– Press the “SCAN” button (type A,
C and D audio).
– Press the “SCAN/A.S” button
(type B and E audio).
– Select the radio or AUX mode.
– Turn off the power of the audio
equipment.
– Turn the ignition switch to the
“LOCK”/“OFF” position.
. When the “SCAN” button (type A, C
and D audio)/“SCAN/A.S” button (type
B and E audio) is pressed while the
MP3, WMA or AAC format data is
played back, the system scans within
the current folder.
. When the “SCAN” button (type A, C
and D audio)/“SCAN/A.S” button (type
B and E audio) is pressed while data
(except for the MP3, WMA or AAC
formats) is played back, the system
scans the disc.
For iPod® (when playing music):
For iPod® (when playing audiobook):
& Display selection
“TEXT” button
For iPod® (when playing podcast):
If you press the “TEXT” button during
playback, the display will change as
shown in the following sequence.
For CD-DA:
For MP3/WMA/AAC:
! Page (track/folder title) scroll
If you press the “TEXT” button again and
hold it, the title will be scrolled so you can
see all of it.
NOTE
. The display is designed to show
titles of up to 24 characters.
. If no operations are performed for 10
seconds, the screen that was displayed
before pressing and holding the
“TEXT” button will be shown.