Instruments and controls/Mirrors
! Remote control mirror switch
: Select side to adjust
: Direction control
The remote control mirrors operate only
when the ignition switch is in the “ON” or
“ACC” position.
1. Turn the control switch to the side that
you want to adjust. “L” is for the left mirror,
“R” is for the right mirror.
2. Move the control switch in the direction
you want to move the mirror.
3. Return the control switch to the neutral
position to prevent unintentional operation.
The mirrors can also be adjusted manually.
! Power folding mirror switch (if
equipped)
The power folding mirror switch operates
only when the ignition switch is in the “ON”
or “ACC” position.
To fold the outside mirrors, press the
power folding mirror switch. To unfold the
mirrors, press the switch again.
NOTE
. If the outside mirrors have been
operated (folded or unfolded) manually,
when you turn the ignition switch from
the “LOCK”/“OFF” position to the
“ACC” or “ON” position, the outside
mirrors may be adjusted automatically
depending on the status of the power
folding mirror switch.
. If the outside mirrors have been
3-105
manually folded slightly forward of the
regularly unfolded position, when you
turn the ignition switch from the
“LOCK”/“OFF” position to the “ACC”
or “ON” position, the outside mirrors
may automatically fold further forward
depending on the status of the power
folding mirror switch. When this happens, press the power folding mirror
switch. By doing so, the outside mirrors which have been folded to the
furthest forward position will extend to
the regularly unfolded position and
then fold rearward in the usual way. In
order to unfold the outside mirrors,
press the switch again.
. When you unfold the outside mirrors
manually, the mirrors may become
wobbly. Be sure to unfold the mirrors
by operating the switch. If the outside
mirrors are still wobbly, fold the mirrors
again and then unfold them by operating the switch again.
. When the temperature is low, the
outside mirrors may stop during operation. Push the switch again. When the
outside mirrors do not work by operating the switch, move the outside mirrors several times manually. This
makes it possible to operate them by
switch operation.
. When you operate the power folding
mirror switch continuously, it may not
– CONTINUED –