3-68
Instruments and controls/Multi function display
5. Select “Set” by operating the “ ” or
“ ” switch and confirm the setting by
pulling the “ /SET” switch toward you.
6. The system will notify you that the
setting is complete.
NOTE
. The notification will be displayed
with information of both date and
distance or either date or distance in
accordance with the setting
. When “_ _” is selected for either the
“Month”, “Day”, “Year” or “Distance”
item instead of numbers, the set notification will be deactivated.
. If the notification continues for 15
days or more, the system will display
“_ _” on the screen.
. When the distance announcement
reaches 0 km, the display will show
“0000” for the next 311 miles (500 km).
After exceeding 311 miles (500 km), “_
_ _ _” will be displayed.
! Oil filter setting
The setting procedure is the same as
“Engine oil setting” F3-67, but select the
“Oil Filter” item in step 2.
! Tires setting
The setting procedure is the same as
“Engine oil setting” F3-67, but select the
“Tires” item in step 2.
! Maintenance schedule setting
The setting procedure is the same as
“Engine oil setting” F3-67, but select the
“Maintenance Schedule” item in step 2.
! On/Off setting
2. Operate the “ ” or “ ” switch to
select the “On/Off” item. Then pull the “ /
SET” switch toward you.
1. Perform the preparation steps according to “Preparation for maintenance settings” F3-66.
3. The current setting will be displayed.
Pull the “ /SET” switch toward you to
enter the selection mode.