Instruments and controls/Multi function display
F3-40.)
3-37
rear gate) is opened while the welcome
screen is displayed, the door ajar
warning will appear.
. The welcome screen can be set to
on or off. For details, refer to “Bypass
screen setting” F3-64.
. For a certain period of time after the
welcome screen has once appeared, it
may not appear again even when the
driver’s door is opened again. This
does not indicate a malfunction.
& Basic operation
& Ending screen
If the ignition switch is turned to the
“LOCK”/“OFF” position, one of the following screens will be displayed as the
ending screen before the screen turns off.
. If “Eco Summary” is set to “Off” in the
“Bypass screen setting”: The “Goodbye”
screen will be displayed.
. If “Eco Summary” is set to “On” in the
“Bypass screen setting”: The “Fuel consumption results screen” will be displayed.
Control switch
1) Up (select)
2) Set (enter)
3) Down (select)
By operating “ ” or “ ” of the control
switch, the screens and selection items
can be switched. When the “ /SET”
switch is pulled toward you, the item can
be selected and set.
& Welcome screen
When the door is unlocked and the
driver’s door is opened, the welcome
screen will appear for a short time.
NOTE
. The welcome screen will disappear
when the ignition switch is turned to
the “ON” position while the welcome
screen is displayed.
. If any of the doors (including the
For details about the bypass screen
setting, refer to “Bypass screen setting”
F3-64.
– CONTINUED –