Keys and doors/Rear gate
! Operating the windows
& Initialization of power window
If the vehicle’s battery is disconnected due
to situations such as battery or fuse
replacement, the following functions will
be deactivated.
. One-touch auto up/down function
. Anti-entrapment function
To open:
Press the switch down and hold it until the
window reaches the desired position.
To close:
Pull the switch up and hold it until the
window reaches the desired position.
When the lock switch on the power
window switch cluster, located on the
driver’s side door, is in the lock position,
the passengers’ windows cannot be operated with the passengers’ switches.
Initialize the power window using the
following procedure to reactivate these
functions.
1. Close the driver’s door.
2. Turn the ignition switch to the “ON”
position.
3. Open the driver’s side window halfway
by pushing down the power window
switch.
4. Pull up the power window switch and
close the window completely. Continue
pulling up the switch for approximately 1
second after the window is closed completely.
5. Open the driver’s side window completely by fully pushing down the power
windows switch.
2-31
Rear gate
& Manual rear gate (if
equipped)
The rear gate can be locked and unlocked
using any of the following systems.
. Power door locking switch: Refer to
“Power door locking switches” F2-7.
. Keyless access with the push-button
start system (if equipped): Refer to “Keyless access with push-button start system”
F2-8.
. Remote keyless entry system: Refer to
“Remote keyless entry system” F2-17.
To open:
Rear gate opener button
1. Unlock the rear gate.
– CONTINUED –