11-46
Maintenance and service
corresponding fuse. If a fuse has blown,
replace it.
1. Turn the ignition switch to the “LOCK”
position and turn off all electrical accessories.
2. Remove the cover.
3. Determine which fuse may be blown.
Look at the back side of each fuse box
cover and refer to “Fuses and circuits”
F12-6.
Main fuse
The fuse puller is stored in the main fuse
box in the engine compartment.
Main fuse box
1)
2)
Good
Blown
If any lights, accessories or other electrical
controls do not operate, inspect the
4. Pull out the fuse with the fuse puller.
5. Inspect the fuse. If it has blown,
replace it with a spare fuse of the same
rating.
6. If the same fuse blows again, this
indicates that its system has a problem.
Contact your SUBARU dealer for repairs.
The main fuses are designed to melt
during an overload to prevent damage to
the wiring harness and electrical equipment. Check the main fuses if any
electrical component fails to operate (except the starter motor) and other fuses are
good. A melted main fuse must be
replaced. Use only replacements with the
same specified rating as the melted main
fuse. If a main fuse blows after it is
replaced, have the electrical system
checked by your nearest SUBARU dealer.