Robert Sorby varekatalog Robert Sorby catalogue 2018-2019 | Page 7
7
SCRAPERS
Negative Rake Scraper
Ref
821H
U
Size
⁄ 4 " (19mm)
3
821H
Negative Rake Scraper
Overall Length
16"
Handle Length
10"
We’ve changed the name of this tool to suit its wider application. Formerly known as
the Hardwood Scraper it was originally designed to tackle hardwoods when producing
musical instruments. However, the tool is equally at home on all types of wood and is
as effective on spindle work as it is on bowls – the action of the negative rake on the
bevel reducing the risk of grain tear-out and leaving a polished surface that requires
little or no sanding.
8007LH
Bowl Finishing Outboard Scraper
HEAVY DUTY SCRAPERS
All heavy duty finishing scrapers are produced in a massive 1 1 ⁄ 2 "x 3 ⁄ 8 " (38mm x 10mm) section.
This means that they absorb vibrations and are stable in use making them ideal for long
overhangs over the tool rest when producing deep vessels, larger bowls and platters.
Bowl Finishing Outboard Scraper
Ref
8007LH
U
Size
1 1 ⁄ 2 " (38mm)
Overall Length
21"
Handle Length
14"
8004LH
Full Round Scraper
Designed for finishing when working in the outboard mode of the lathe.
Full Round Scraper
Ref
8004LH
U
Size
1 1 ⁄ 2 " (38mm)
Overall Length
21"
Handle Length
14"
For finishing on bowls and platters especially where a smooth curve is required.
8008LH
Bowl Finishing Inboard Scraper
Bowl Finishing Inboard Scraper
Ref
8008LH
U
Size
1 1 ⁄ 2 " (38mm)
Overall Length
21"
Handle Length
14"
Designed for finishing bowls when working inboard.
EXTRA HEAVY DUTY SCRAPERS
n)
Slightly narrower than the heavy duty scrapers but produced from thicker 1 ⁄ 2 " (13mm section)
this range of five scrapers practically eliminate vibration and offer the ultimate in bowl finishing
hing
stability. These tools are available everywhere, but in North America are exclusive to Woodcraft.
craft.
8011H
Square Nose Scraper
Square Nose Scraper
Ref
8011H
Size
1" (25mm)
Overall Length
21"
Handle Length
14"
For finishing convex and flat bottomed forms.
8012H
Bowl Scraper
Bowl Scraper
Ref
8012H
Size
1" (25mm)
Overall Length
21"
Handle Length
14"
For inboard bowl finishing.
8013H
Round Nose Scraper
Round Nose Scraper
Ref
8013H
Size
1" (25mm)
Overall Length
21"
Handle Length
14"
For bowls and platters where a smooth curve is required.
8014H
Round Nose Scraper
Round Nose Scraper
Ref
8014H
1
Size
⁄ 2 " (13mm)
Overall Length
22"
Handle Length
14"
For bowls and platters where a smooth curve is required.
8015H
Square Nose Scraper
Square Nose Scraper
Ref
8015H
1
Size
⁄ 2 " (13mm)
For finishing convex and flat bottomed forms.
Overall Length
22"
Handle Length
14"