Robert Sorby varekatalog Robert Sorby catalogue 2018-2019 | Page 56

56
ProEdge
SHARPENING REFINED
The Robert Sorby ProEdge offers effortlessly repeatable
atable sharpening
every time. Hugely versatile, this industrial strength
h machine is built
to last and delivers astounding ‘factory finish’ results
ults without fail.
Perhaps the most simple to use sharpener on the market,
this system replicates the industry standard of achieving
hieving
a flat grind using the preferred method of belts over
ver
traditional grinding wheels.
Sharpens bench, framing, carving and turning chisels, drill
bits, plane irons, knifes and garden tools.
FEATURES AND BENEFITS:
Sharpens with belts rather than abrasive wheels
• Cuts steel rather than rubbing it off
• Change belts in seconds
• Flat bevel rather than hollow grind
• Wide range of grits and abrasives
• Sharpens all exotic alloys and carbide*
Angle setter guarantees repeatability
• Sharpen at exactly the same angle every time
• Nine factory indexed settings provide a guide for all
types of tool
• Can be locked between indexes for custom settings
Exceptional Robert Sorby construction
• Built from solid steel
• Pivots for operator comfort
• Inexpensive to run
• Small workbench footprint
• Backed by Robert Sorby Warranty
Ref
PATENTED
Description
PED01
ProEdge Deluxe System
One of each item marked * is included in the ProEdge Deluxe System
PE01
ProEdge System
One of each item marked X is included in the ProEdge System
RSDVDPE
Pictured wth
Trizact 600 belt
(not supplied
with machine)
ProEdge DVD
eeds
A wide range of belts and accessories to suit all sharpening needs
can be seen on pages 58 - 59.
Footprint: H - 16 3 ⁄ 8 " (416mm), W - 11 1 ⁄ 4 " (286mm)
Weight: 14.5Kg (32lb)
Technical Details:
1
Motor
⁄ 2 hp
Surface Speed 1440 ft (440m) per minute
i
Recommended sharpening angles
15º Skew chisels
20º Main bevel angle for bevel edge woodworking chisels (soft wood).
Bevel angle for parting tools.
25º Honing angle for bevel edge chisels (soft wood). Main bevel angle
for bevel edge chisels (hard wood) and bench plane irons. Standard
carving chisels and gouges.
30º Honing angle for bevel edge chisels (hard wood) and bench plane irons.
Main bevel angle for mortice, registered and framing chisels.
35º Honing angle for mortice, registered and framing chisels.
45º Bevel angle for roughing, spindle and bowl gouges.
60º Bevel angle for bowl gouges (deep bowl turning).
80º Clearance angle for scraper tools and cutters.
90º Shear scrapers and shear scraper cutters.
Scan here to find out more
Or visit: www.robert-sorby.co.uk/proedge.htm
15º
20º
25º
30º
35º
45º
60º
80º
90º
*Carbide tools require use of diamond belt