Robert Sorby varekatalog Robert Sorby catalogue 2018-2019 | Page 33
Sovereign Accessories
33
A range of accessories are available to enhance the Sovereign system. Use a simple threaded coupler to extend the handle
length, increase stability with the inclusion of a side handle or vary the weight and balance of the handle with the adoption of a
counter weight.
SOV-CT SOVEREIGN TANG COLLET ADAPTOR SOV-TC SOVEREIGN THREADED COUPLER
The SOV-CT ensures a firm fit for our many
flat tang tools. Tools that fit this collet include
square end scrapers, hardwood scrapers, round
nose scrapers, diamond / side scrapers, curved
scrapers and box scrapers, oval and standard
skews, the standard and fluted parting tools
and the spindle and continental
roughing gouges. The Sovereign Threaded Coupler.
This handy accessory allows the turner to easily
customise handle length. Use to join handles
together.
SOV-CT
Tang Collet
SOV-TC
SOV-C06 SOVEREIGN COLLET ADAPTOR 1 ⁄ 4 "
The SOV-C06 has the narrowest aperture and is
suitable for the 1 ⁄ 4 " Spindle gouge
There are also a few tools that require no collet
and fit directly into 5 ⁄ 8 " shank end of the
Sovereign handle. Among these are the 1 ⁄ 2 " and ¾"
bowl gouges, the 1 ⁄ 2 " fingernail bowl
gouge and the extra long multi tip
hollowing tool.
SOV-SH SOVEREIGN SIDE HANDLE
The Sovereign Side Handle delivers that extra
stability by providing a horizontal screw-in
appendage. The machined knurled pattern
provides additional grip.
SOV-C06
1
⁄ 4 " Collet
SOV-SH
SOV-C10 SOVEREIGN COLLET ADAPTOR ⁄ 8 "
3
The SOV-C10 presents a 3 ⁄ 8 " aperture making a
fast hold for 1 ⁄ 4 " bowl gouges and fingernail
bowl gouges. It also matches 3 ⁄ 8 " spindle gouges,
fingernail spindle gouges and long and
strong spindle gouges.
SOV-CW SOVEREIGN COUNTER WEIGHT
The Sovereign Counter Weight is a useful
accessory to vary weight balance in the handle.
Unscrew the end cap and insert into the hollow
shaft of the handle.
SOV-C10
3
⁄ 8 " Collet
SOV-C13 SOVEREIGN COLLET ADAPTOR 1 ⁄ 2 "
The SOV-C13 has the widest aperture for tools
made from round section at 1 ⁄ 2 " and is perfectly
aligned to take 3 ⁄ 8 " bowl gouges and fingernail bowl
gouges, the 1 ⁄ 2 " spindle gouge, fingernail spindle
gouge and the long and strong spindle gouge as
well as the TurnMaster which can be seen on page
10. The Spiralling System and Texturing Tool on
page 29 and 30 also use this collet.
SOV-CW
SOV-EXT SOVEREIGN EXTENSION
SOV-C13
1
⁄ 2 " Collet
Ref
SOV-CT
SOV-C06
SOV-C10
SOV-C13
SOV-TC
SOV-SH
SOV-CW
SOV-EXT
Description
Collet Adaptor Flat Tang
Collet Adaptor
Collet Adaptor
Collet Adaptor
Threaded Coupler
Side Handle
Counterweight
Handle Extension 4" - 102mm
The Sovereign Extension is a useful addition to
the range of accessories. Custom-made during
the development of the new Sovereign sets
(see page 30 and 31). This 4" extension adds
length to any Sovereign handle.
NOTE: a threaded coupler is required.
Size
⁄ 4 " (6mm)
⁄ 8 " (10mm)
1
⁄ 2 " (13mm)
1
3
SOV-EXT