Robert Sorby varekatalog Robert Sorby catalogue 2018-2019 | Page 26

26
Sovereign Tools
BOWL GOUGES
Standard Bowl Gouges (Deep Flute)
Ref Size Collet
842 1/4” (6MM) SOV-C10
842 3/8” (10MM) SOV-C13
842 1/2” (13MM) Direct fit
842 3/4” (19MM) Direct fit
8427 1/2” (13MM) Direct fit
8427 3/4” (19MM) Direct fit
842 Bowl Gouge - Standard
A must in the tool kit of every bowl turner. These tools are ideal for making bowls. They can produce either massive profiling cuts or
delicate finishing cuts as necessary. At 18” the 8427 tools offer significant extended length.
Fingernail Bowl Gouges (Deep Flute)
Ref Size Collet
842F 1/4” (6MM) SOV-C10
842F 3/8” (10MM) SOV-C13
842F 1/2” (13MM) Direct fit
842F Bowl Gouge - Fingernail
The fingernail shape of this gouge increases flexibility allowing the turner to perform ‘pull cuts’ without catching the lathe bed. The
greater cutting area can be used equally well for heavy profiling cuts or fine, delicate shearing cut.
SPINDLE GOUGES
Standard Spindle Gouges
840 Spindle Gouge - Standard
Ref Size Collet
840 1/4” (6MM) SOV-C06
840 3/8” (10MM) SOV-C10
840 1/2” (13MM) SOV-C13
840 3/4” (19MM) SOV-CT
These are detailing tools used on between-centre work, where the grain is running parallel to the lathe bed. Spindle gouges are used to
create coves, beads and other profiles on goblets, vases, bed posts, candle sticks and other spindle projects.
840F Spindle Gouge - Fingernail
Fingernail Spindle Gouges
Ref
840F
840F
Size
3/8” (10MM)
1/2” (13MM)
Collet
SOV-C10
SOV-C13
Ideal for fine detailing on spindle work. Having the wing tips ground back reduces the danger of them catching when working in confined
areas.
Long and Strong Spindle Gouges
Ref
841
841
Size
3/8” (10MM)
1/2” (13MM)
841 Long and Strong Spindle Gouge
Collet
SOV-C10
SOV-C13
Apart from the length of the blade, the tools are identical to the standard strength gouges. The increased length of the blades allows a
further reach into the workpiece.
SPINDLE ROUGHING GOUGES
Ref
843
Size
3/4” (19MM)
843 Spindle Roughing Gouge
Collet
SOV-CT
Recommended for turning uneven or square spindle stock to round. The shape of the spindle roughing gouge enables the tool to cut
safely. Not designed for use on bowl grain projects.
822 Detail Pointer
DETAIL POINT
Ref
822
Size
3/8” (10MM)
Collet
SOV-C10
With its three facet point, this is ideal for fine detailing work on bowl and spindle work.
EXCELSIOR HIGH PERFORMANCE SPINDLE GOUGES
Ref Size Collet
840G 1/4” (6MM) SOV-C06
840G 3/8” (10MM) SOV-C10
840G 1/2” (13MM) SOV-C13
We have created an increased edge life by bonding Titanium Nitride to our existing HSS tools. Sharpen in the same way as a regular
spindle gouge - incredible performance.
840G Spindle Gouge - High Performance