Robert Sorby varekatalog Robert Sorby catalogue 2018-2019 | Page 15
Hollowing System
15
The Robert Sorby Hollowing System offers a collection of safe and effective tools for the turner wanting to explore the highly
prized skill of deep vessel hollowing. The reach of these tools will allow for the most ambitious projects and offer the woodturner
multiple options.
RS208
Arm Brace
RS206
ARM BRACE (RS206)
Conceived to enhance control and comfort when
using either the Hooker (RS210) or Slicer (RS205).
It enables the turner to reach further over the tool rest, ,
increasing control in the face of rotational forces. The addition of a
neoprene grip serves to dampen vibration.
MAIN HANDLE (RS202)
Main Handle
RS202
The standard pistol grip for the hollowing system. Provides handle support for the
S205).
Hooker (RS210) and Slicer (RS205).
Hooker
RS210
HOOKER (RS210)
Designed as a safe method for hollowing vessels through narrow apertures – offers a
range of combinations. Its design
gn allows for both inboard and outboard turning. It
comes fitted with a small teardrop
rop scraper (RS222) for finishing. The Hooker
also accommodates the Swivel l Tip Complete assembly which allows for
1GC, RS212C and RS212GC) to be
hollowing tips (RS211C, RS211GC,
used. Note the Swivel Tip Complete
plete comes with Round
14 ¼”
C). The
End Swivel Tip Cutter (RS211C).
(360MM)
tool should be fitted to the Main n
Handle (RS202) or the Arm
Brace (RS206). All cutters for
this tool are available in HSS
Round End Swivel
Swive el
and in our high performance,
Tip RS211C
titanium nitride coated HHS,
Excelsior range.
The hooker is fitted with
the small teardrop. Other
cutters are optional.
Swivel Tip
Sw
Co
Complete
RS211
RS
Small Teardrop
RS222
R
Excelsior
Exce
Small
Teardrop
T
R
RS222G
Excelsior Round End
Swivel Tip RS211GC
S
ide End Swivel
Swiveel
Side
Tip RS212C
Slicer
RS205
Excelsior Side
S End
Swivel Tip RS212GC
R
SLICER (RS205)
The hollow ground nose of the tungsten carbide tip allows
ws deep plunge cuts, at
any angle, to remove cones from bowls and vessels. The e Slicer can also be
used as a heavy duty parting tool. It should be mounted in the Main
Handle (RS202).
DIAMOND SHARPENIIG FILE (RS224)
The perfect tool to quickly hone your cutters.
Simply add a little water to act as a
lubricant and pass over the top /
flat face of the cutter. For
best results hone little
and often.
Diamond
Sharpening File
RS224
15 ¼”
(390MM)
Ref Description
RS206 Arm Brace
RS202 Main Handle
RS210 Hooker
RS211C Round End Swivel Tip
RS211GC Excelsior Round End Swivel Tip
RS212C Side End Swivel Tip
RS212GC Excelsior Side End Swivel Tip
RS222 Small Teardrop
RS222G Excelsior Small Teardrop
RS211 Swivel Tip Complete
RS205 Slicer
RS224 Diamond Sharpening File
RS223 Allen Key (1/8” AF)