STANDARDS AND REGULATIONS
SANS 1056-1 Ball valves. Part 1: Fire-safe valves. 2008 1.03
SANS 1056-2 Ball valves. Part 2: Heavy-duty valves (not fire-safe). 2012 2.02
SANS 1056-3 Ball valves. Part 3: Light-duty valves (not fire-safe). 2016 2.05
SANS 1062 Pressure and vacuum gauges. 2010 1.01
SANS 1067-1 Copper based fittings for copper tubes. Part 1: Compression fittings. 2005 2.01
SANS 1067-2 Copper based fittings for copper tubes. Part 2: Capillary solder fittings. 2005 2.01
SANS 1109-1 2005 3.00
SANS 1115 Pipe threads where pressure-tight joints are made on the threads. Part 1: Designation,
dimensions, and tolerances.
Cast iron gratings for gullies and stormwater drains. 2007 1.02
SANS 1123 Pipe flanges. 2015 3.03
SANS 1200 AA Standardised specification for civil engineering construction. Section AA: General (small works). 1986 3.00
SANS 10120-2 DB Standardised specification for civil engineering construction. Section DB: Earthworks (pipe trenches). 1982 2.00
SANS 1200 L Standardised specification for civil engineering construction. Section L: Medium-pressure pipelines. 1983 2.00
SANS 10120-2 LB Standardised specification for civil engineering construction. Section LB: Bedding (pipes). 1983 2.00
SANS 10120-2 LD Standardised specification for civil engineering construction. Section LD: Sewers. 1982 2.00
SANS 10120-2 LF Standardised specification for civil engineering construction. Section LF: Erf connections (water). 1983 1.00
SANS 1209 Pipe holder bats. 2008 1.01
SANS 1223 Fibre-cement pressure pipes and couplings. 2014 2.03
SANS 1240 Automatic shut-off flush valves for water closets and urinals. 2016 2.03
SANS 1283 Modified polyvinyl chloride (PVC-M) pressure pipes and couplings for cold-water services in
underground mining.
Precast concrete manhole sections and components. 2013 1.06
2012 2.01
2006 3.00
SANS 1307 Pipe threads where pressure-tight joints are not made on the threads. Part 1: Designation,
dimensions and tolerances.
Domestic storage solar water heaters. 2014 5.01
SANS 1321-1 Non-metallic waste traps. Part 1: Plastic waste traps. 2009 1.01
SANS 1321-2 Non-metallic waste traps. Part 2: Rubber waste traps. 2013 1.03
SANS 13253 Ducted air conditioners and air-to-air heat pumps - testing and rating performance. 2014 2.00
SANS 1352 2012 1.00
SANS 1356 The installation, maintenance, replacement and repair of domestic air source water heating
heat pump systems
Fixed electric instantaneous water heaters. 2006 2.00
SANS 1402-1 Acrylic sanitaryware - Baths. 2008 1.02
SANS 1453 Copper tubes for medical gas and vacuum services. 2018 1.05
SANS 1476 Fabricated flanged steel pipe works. 2013 1.03
SANS 1480 Single control mixer taps. 2005 1.02
SANS 1509 Flush valves for WC flushing cisterns. 2017 2.02
SANS 1529-1 Water meters for cold potable water. Part 1: Metrological characteristics of mechanical water
meters of nominal bore not exceeding 100mm.
Water meters for cold potable water. Part 3: Physical dimensions. 2006 2.03
SANS 1294
SANS 1306-1
SANS 1529-3
2006 1.01
1.01
SANS 1532 Water meters for cold potable water. Part 4: Mechanical meters of nominal bore exceeding
2004
100mm, but not exceeding 800mm.
Water meters for cold potable water. Part 9: Requirements for electronic indicators used with mechanical 2008
water meters, electronic water meters and electronic pre-payment water measuring systems.
Vent valves for drainage installations.
2003 SANS 1551-1 Check valves (flanged and wafer types). Part 1: PN series. 2008 1.02
SANS 1551-2 Check valves (flanged and wafer types). Part 2: Class series. 2007 1.02
SANS 1601 Structured wall pipes and fittings of uPVC for buried drainage and sewerage. 2017 2.03
SANS 1689 Corrugated stainless steel piping systems for hot and cold water supplies. 2017 1.01
SANS 1731 Polyethylene storage tanks for water and chemicals. 2017 1.00
SANS 1733 WC flushing systems (low-flushing capacity) that operate with flushing cisterns. 2011 1.03
SANS 1748-1 2015 1.02
SANS 1808-2 Glass-fibre reinforced thermosetting plastics (GRP) pipes. Part 1: Pipes for water supply,
sewerage and drainage.
Water supply and distribution system components. Part 2: Metallic compression type pipe couplings. 2017 1.05
SANS 1808-5 Water supply and distribution system components. Part 5: Flexible connectors. 2010 1.03
SANS 1808-9 Water supply and distribution system components. Part 9: Metering taps and valves (metallic bodies). 2017 1.03
SANS 1529-4
SANS 1529-9
Plumbing Africa Directory 2019
116
2.01
2.00
www.plumbingafrica.co.za