News & Events
Successful first year for Bilfinger
Tebodin United Kingdom
The UK office of global consulting and
engineering firm, Tebodin, part of Bilfinger,
has celebrated their first year of operations
with new projects within the industrial and
food sectors which will pave the way for
further expansion in 2018.
Ian Dunkley, Managing Director of Bilfinger
Tebodin United Kingdom, who was appointed
in December 2016 commented, ’It’s been a
fantastic year for us with a ten-fold increase
in staff numbers, a move to a new office in
Warrington and an increasing order book
that bodes well for next year when we plan to
open a North East England office on Teesside.’
www.tebodin.bilfinger.com
Riley Gear
Between the two fully equipped locations,
Riley Gear has about 75 employees and
operates over 95,000 combined square feet
of manufacturing space, providing design
consulting and engineering services to
AGMA specification; reverse engineering;
and prototype to production and production
automation support to its customers mainly
in the U.S., but overseas as well. Some of
our customers have been with us for 35 to
40 years or more. And Riley Gear’s quality
management system provides assurance
that all gears are manufactured to blueprint
specifications. It is capable of producing
gears from 0.25 to 50 inches in pitch diameter
to AGMA Class Q15 or DIN 2 specifications.
Whether it’s speed, power, noise, torque, or
accuracy of motion, the team at Riley Gear
works with the customers to find a solution
to their gearing requirements. We can
provide immediate quotations and expedited
manufacturing lead times. Riley Gear prides
itself on the quality
www.rileygear.com
Probably the Most
Environmentally Friendly
Double Skin Tank Lining System
in The World
Fuelvac® solvent free double skin lining
system provides around the clock leak
detection for above and below ground
storage tanks of any size, utilising Class 1
vacuum pressure monitoring.
The World’s only double skin liner that uses
solvent free coatings throughout the system
alongside non-hazardous materials.The
system has been independently tested to
conform to EN13160-7:2016 by TUV NORD
and has completed all testing successfully.
For more information please visit:
www.abfad.co.uk
Email: [email protected]
Tel No: 0191 543 7166
Stainless Band
Supplying to manufacturing companies
worldwide, Stainless Band is a UK-based
producer of stainless steel coil processed
products. Quality is assured by testing, which
is carried out on material in both in raw state
and before leaving it’s facilities after process-
ing, as well as multiple spot-tests throughout
the production process.
A £250,000 recent investment allows Stainless
Band to store more raw materials, increase
processing capabilities, streamline logistics
and reduce its impact on the environment.
A wide range of in-house processing services
including slitting, shearing, coating, finishing,
edge dressing and more is available, so there’s
no wonder that Stainless Band are a preferred
supplier to so many manufacturers world-
wide.
For more information on Stainless Band,
please call +44 (0) 1274 566 831 or visit
www.stainlessband.co.uk.
TRINAMIC Motion Control
GmbH & Co KG A milling cutter for perfect
surface quality in stainless steel
TRINAMIC Motion Control announces the
TMCM-1633-CANopen, a new compact
300W BLDC servo controller module with
sinusoidal commutation compatible with
the industry standard CANopen protocol.
The TMCM-1633-CANopen is a cost-efficient
module embedding advanced motor control
and motion control functions, as well as PLC
features. The new drive (92mm x 50mm) is
equipped with a CAN interface, CANopen
(CiA-402) protocol stack and Trinamic’s free
TMCL-IDE. The module provides a flexible,
cost-effective solution to decentralized
coordinated control of BLDC or BLAC motors
of up to 10A RMS continuous current at 48V
supply voltage. Featuring field-oriented
control using a/b/n incremental encoder
signals, the BLDC servo controller allows
for precise and dynamic positioning and
trapezoidal ramping. The firmware supports
hall sensor inputs for faster initialization. CrazyMill Cool is a new carbide ball mill
for finishing operations in titanium and
superalloys. This coated end mill with four
teeth is available in diameters from 1 - 8
mm for milling depth up to 5xd, each with a
cutting depth of 2xd. Two more versions are
available specially for medical applications
(implants) with usable milling lengths of 3xd
and 4x d.
Site: www.trinamic.com
Email: [email protected]
A unique geometry with progressive flutes
enables vibration free milling. This provides
excellent surface quality when milling in
radius areas or cylindrical areas. Integrated
cooling channels provide the cutting edges
in each position continuously with coolant
avoiding overheating and allowing highest
cutting speeds and maximum performance.
Chips are flushed out of the machining area.
The result is a surface quality equal to a
grinding finish.
Phone. +41 91 610 40 00
[email protected]
www.mikrontool.com
Issue 30 PECM
97