support these will need in service.
A large part of any installation is
the training of your staff and any
hand-holding they may need after
commissioning, all part of the Chell
engineers will be keen to help.
Tel: 01692 500555
Email: [email protected]
www.chell.co.uk
measurement & monitoring
Eliminate 52% of
bearing failures
Lubrication Corrosion
11% 4%
Other
5%
Overloading
4%
Particle
Contamination
48%
Misalignment
13%
Disassembly
15%
A major study into equipment reliability has shown 52% of all bearing failures are
due to particle contamination and corrosion caused by water contamination.
The LabTecta ® 66 bearing protection range can reduce bearing oil contamination
from 83% to 0.0003% significantly reducing bearing failure.
Visit www.LabTecta.com for a 3-minute video showing statistics and technology
www.aesseal.com
Got Modbus? Issue 23
PECM
17
Plug and Play the Internet of Things!
PECM1116.indd 17
20/10/2016 13:49:09
Every day brings a new request to connect a Modbus device
to our SmartHub™ in order to get that rich functionality, to
monitor, manage and inform. All done remotely, real time and
on-line. So how do we get Modbus Controllers talking to the
CDL SmartHub™ so quickly, securely and seamlessly?
The Intelligence is in the SmartHub™
INSITEC LPS
Robust, reliable, real-time particle sizing for process
control
Once our NanoULTRA is connected to your target device
(RS232 or RS485) and powered up [battery or mains], all of
the configuration work is then done via the SmartHub™,
there is no need to connect to the device directly with a PC to
configure Modbus communications. This can all be achieved,
securely via any browser/Smart Device.
Improve process efficiency - enhance product quality –
reduce production costs
•
•
•
•
Provides real time particle sizing in the range 0.1-2500μm
Analysis of slurries, suspensions and emulsions
Completely automated measurement and results
reporting
Robust industrial design with minimal maintenance
Material relationships
www.malvern.com
www.captiondata.com
+ 44 (0) 1905 754 078
[email protected]
Issue 28 PECM
109