Editors Choice
MSPS part of consortium to design new
Cell Therapy Catapult Manufacturing Centre
Supporting growth of UK cell therapy industry
Morgan Sindall Professional Services (MSPS), the multidisciplinary design and
engineering firm, is providing mechanical and engineering, civil and structural and
CDM services to design the Cell Therapy Catapult’s new £55 million large-scale
‘Good Manufacturing Practice’ (GMP) manufacturing centre.
MSPS worked with a consortium of companies to complete the RIBA Stage 3
design: 3PM to provide project management; The Fairhursts Design Group as
project architects; and Gardiner & Theobald as cost managers.
Make your checkweighers
fit for speed and precision
The large-scale GMP manufacturing centre, due to open in 2017, will be used
by companies for the manufacture of late-phase clinical trial material and initial
commercial supply of advanced therapeutic medicinal products including cell and
gene therapies.
Simon Steed, associate director, building services of MSPS, says that the consortium
team was chosen for its combined expertise in designing a Class B environment
facility: “The design will allow for further growth and business efficiency.”
Email: [email protected]
www.professionalservices.morgansindall.com
SuperCORR A protects and lubricates Contacts
on the new Charge/Sync Cable from Lifedge
SuperCORR lubricant and protective coating widely
used by the military, electronics and aerospace
industries for critical applications is used to protect
contacts on the new Lifedge lightning connector
to USB cable to offer the protection needed in
extreme conditions. SuperCORR deposits a dry
protective film with excellent corrosion protection
and lubricant properties plus the added advantage
of a hydrophobic surface rejecting water that ensures the easiest and best
connection for the very close spaced connectors.
Lifedge is the world’s first 100% waterproof, rugged Lightning to USB cable for
charging and mobile connections whatever the weather or conditions. Developed
for use in all outdoor activities including sailing, hiking, military, naval, surveying
or other challenging uses. With an ultra-durable outer coating that will never
fray and double-moulded, super-tough plugs, charging, downloading and data
transfer is improved even in the most extreme and difficult conditions.
Tel 0208 281 6370
www.envirotech-europe.com
High End Chain Lube Spray
Fit for speed
Top speed in measurement signal conditioning with up to
180 weighings per minute, FIT7A is guaranteeing speed and
efficiency in your machines.
Fit for precision
Donghua Limited has launched a new Chain Lube Spray to combat 80%
of chain wear which is a result of poor lubrication. Whilst Donghua chain
already comes pre-treated to improve wear-life, their new Chain Lube
enhances the performance of their chain even further.
Designed for regular use or in between routine maintenance schedules, the
Chain Lube Spray provides a simple but effective way to actively replace or
top-up the lubrication that is inevitably lost during daily operation.
Top values when it comes to precision, with standard deviations of only 0.1 g for 10 kg and the new accuracy class C4.
So your machines can guarantee safety and precision with
minimum reject rates.
Participating stockists of Donghua chain are running a ‘3 for 2’ promotional
campaign until 31/12/15.
Fit for competition
To locate your nearest stockist visit:
www.donghua.co.uk/locate-a-dealer
With up to 60% cost advantage over other load cells based
on electromagnetic force compensation, the FIT7A is
competitively priced.
Flotronic Pump’s new
‘E’ Series’ achieves the
EHEDG seal of approval
Having already secured 3-A Sanitary Standards,
Inc (3-A SSI) appro val for its ‘H’ series pump,
Flotronic Pumps Limited have now achieved the
European Hygienic Engineering & Design Group
(EHEDG) accreditation for their new ‘E’ Series
pump.
Flotronic’s ‘E’ Series pump has been specifically designed for the Food
and Beverage industry and other processes where product contamination
must be avoided. The pump’s features include Flotronic’s established and
unique ‘ONE-NUT’ pump design which allows swift diaphragm access
without disconnecting process pipework. The internal surfaces of the ‘E’
Series pump can be effectively ‘cleaned in place’ or, alternatively, easy
dismantling can be carried out for cleaning and inspection.
Tel: 01444 881871
Your machines can stay competitive and help you open up
new, previously unobtained market segments.
More information:
www.hbm.com/automation-fit7a
HBM United Kingdom Ltd
[email protected]
www.hbm.com
www.flotronicpumps.co.uk
Issue 17 PECM
13