Wednesday, March 27, 2019
Real Estate - 9:30 am
Equipment - 10:00 am
1/4 mile south of State Road
120 in Elkhart, IN on the
NEW County Road 17 to
Protecta Drive at
21066 Protecta Drive
Elkhart, IN 46516
Protecta Drive
Tract 1 Tract 2
N Tract 3
Beck Drive
TERMS & CONDITIONS
DOWN PAYMENT: 10% down payment on the day of the auction with the balance in cash at closing. The down payment may be made in the form
of cash, cashier’s check, personal check or corporate check. Your bidding is not conditional upon financing, so be sure you have arranged financing,
if needed, and are capable of paying cash at closing.
ACCEPTANCE OF BID PRICES: All successful bidders will be required to enter into purchase agreements at the auction site immediately following the
close of the auction. All final bid prices are subject to approval by the seller.
PROCEDURE: The property will be offered in 3 separate tracts. There will be open bidding on all tracts during the auction as determined by the Auctioneer. Bids
on tracts and the total property may compete. The property will be sold in the manner resulting in the highest total sale price, subject to confirmation of the seller.
TRUCK • FORKLIFTS • WELDERS • RACKS • BRAKES • SEWING MACHINES • MUCH MORE
Atlas Specialty Products, Owner
HAHN
4
HahnAuctioneers.com
Phil Hahn - (574) 535-3783
IN Lic. #AU01012967
Brian Wuthrich, Sale Manager
(574) 268-4940 - Milford, IN
Office (574) 773-8445
Nappanee, IN
AC39800021
Jason Hahn
(574) 536-7682
Clint Cripe
(574) 354-8006
NOTE: Truck, forklifts and
tractor to sell at 12 noon.
Terms: Cash or Check with proper ID
Credit Card with Convenience Fee
10% BUYER’S PREMIUM
Not Responsible for Accidents
or Items After Sold
Any Announcements Made Day of Sale
Take Precedence Over Printed Matter
The Farmer’s Exchange, New Paris, IN • www.farmers-exchange.net
If I knew I was going to live this long, I’d have taken better care of myself. ~ Mickey Mantle
O
1996 Dodge Ram 3500 dually pick-up with Cummins diesel engine
167,000 miles; Mitsubishi forklift model FG25N LP Gas 4,000 lb.
capacity goes up 188” with side shift and large pneumatic tires; Mit-
subishi model FG40 LP Gas forklift 8,000 lb. large pneumatic with
side shift 8’ long forks, mast height 132”, 9450 hours; (2) Doosan
model 25E 4,000 lb. LP Gas forklift large pneumatic tires, mast goes
up 189” with side shift, 48” forks; Kubota model 82100 compact
tractor with front end loader, 48” materials bucket, 3 pt. hydrostatic
diesel engine; 20’ V-nose enclosed trailer; 1996 7’ x 28’ gooseneck
4-place horse trailer; (8) Miller CP302 wire welders with Miller 60 Series wire feeds;
Miller CP300 with a Miller 60 Series wire feed; Varied size new trailer tires, some
with aluminum rims; 16’ low profile tandem axle trailer; Palatek air compressor 15
hp motor, 3 phase with Palatek dryer; Quincy QGD-20 air compressor with 2442
hours; Keltec air dryer; Joy 20 hp air compressor; Clark pallet jack; (2) 36” wide
tilting dumpsters; Torch set with tanks and cart; Ramp door springs; (2) trailer light
testers; (2) CM 1-ton hoists, single phase; Power Matic table saw with fence; Graco
tank stir pump, been refurbished; Metal bander with banding tools; Large amount
of varied size tube steel; Diamond plate and aluminum fenders; (2) Jet 10” tilting
arbor saws; Perform Max portable table saw; Large steel framing table; Bottle jacks; Jet table saw with aluminum blade; Aluminum extrusion
pieces; Approx. 8 Makita chopsaws, some with abrasive blades; Diamond plate aluminum corners; Large amount of floor model fans; Large
amount of cargo door hinges; Approx. 8 fiberglass stepladders; 2’ Werner stepladders; Misc. handtools including Dewalt screwguns, Makita
screwguns, drills, Makita sanders, routers, pneumatic impacts, pneumatic drills, staplers; Trailer jacks; Large amount of steel cantilever
racking; (15) large steel racks for sheeting; Approx. 10 older industrial sewing machines - Singer, Pfaff, many with tables and extra sewing
machine parts; Porter Cable abrasive chop saw; 4’ x 8’ sheets of insulation, sheets of Styrofoam; sheets of misc. trim; varied thicknesses of
white wallboard; approx. 40 sheets of OSB and plywood; 2” x 4”s and 1” x 3”s; diamond plate aluminum steps; wiring, lights, electrical
boxes; Approx. 75 sheets of aluminum in varied colors and dimensions; Approx. 30 varied size trailer axles; Steel rolling catwalks; large
amount of office items to include: desks, book returns, leather chairs, artwork, file cabinets.
REAL ESTATE
Tract #1: Located
Tract 2 Building
at 21184 Protecta
Drive, Elkhart, IN,
containing
3.86
acres, a 9,000 square
foot building with
2 docks, 4 over-
head doors that are
16’ wide x 14’ tall.
120/208 3 phase
electric. This lot is
completely fenced. Real Estate Taxes are
approx. $2,500 per year. This building
was built in 1992.
Tract #2: Located at 21066 Protecta
Drive, Elkhart, IN, containing 2.79
Tract 1 Building
acres. This property has a 39,560
square foot building with an office area. 120/208 3 phase electric. This building was built
in 1987. This property is also fenced. This building has overhead doors but no truck dock.
Taxes are approx. $11,000 per year.
Tract #3: An unimproved property on Beck Drive, containing 4.15 acres. This property is
partially fenced. No tax information.
Industrial Auction