STRUCTURESCAN® 3D WITH ACTIVE IMAGING ENHANCEMENTS
Active Imaging Enhancements for StructureScan® 3D:
• Updated colour palettes to maximize detail and appearance
• Depth Highlighting – in 3D mode
• Better isolate specific structure/bottom depths to hone in on prime
fishing areas
• Select the upper and lower values and 3D will fill the area with colour
• Reduced noise in the water column - Filter out the “vapour trail” left by
turbulence of some boats
EASE OF USE UPDATES
This new software update allows for independent structure icons on your
homepage, which means no more searching through the “Structure” page
menus to find your desired View (Down/Side/3D). The SideScan, DownScan
Imaging, and 3D Sonar icons replace the StructureScan icon on the home
page- enabling direct access to your favourite structure views. .
The separate icons also make it easier to use the applications and customize
images.
Additionally, with the HDS Carbon 18.3 update you are no longer limited to
just two Structure views. Now you can view Side/Down/3D all at the same time
to get the full picture of what is beneath the boat.
In fact you will now have more split screen options than ever before! With
more control over customization. You have the ability to resize panels that
were previously fixed = more flexibility. Get the view you want out of your unit!
Customise your favourite pages and save them for easy future access.
When a 9-pin transducer is connected to the 9-pin port on an HDS Carbon,
the sonar will now default to enabling/using Channel 2 as the sonar source.
For those of you using TotalScan or the new Active Imaging 3-in-1 transducer,
you will not have to manually turn on Channel 2 and then set the sonar source
for Channel 2.
NOTE: You will still have to set the “Use temp data from” option to
Channel 2 in the Settings > Sonar menu.
If you need more assistance with this, feel free to phone John Minnie (our
technical guru) for assistance - 082 443 6738.