Lac Ste. Anne County Activity Report LSAC_Flipbook_Activity Report 2016-17_FINAL_HiRes | Page 33

WHAT ARE THE SIGN SPECIFICATIONS?
Rural Address Panels for quarter-sections and
acreages require aluminum 2mm Engineer
grade panel, or 3/4” plywood, single-sided, blue
background, white border, cropped (rounded)
corners, white, High Intensity 4” HWY “C” font,
letters and numbers. For an address of 9 to 13
digits: a 40” x 8” panel is required, see Diagram 1.
For an address of 14 digits plus: a 50” x 8” panel
is required, see Diagram 2. If the property has
more than one residence, an address and sign
will be required for each residence.
Rural Address Panels for subdivision lots require
aluminum 2mm Engineer grade panel; or 3/4”
plywood, single sided, blue background, white
border, cropped (rounded) corners, white, High
Intensity 6” HWY “C” font letters and numbers.
For an address of 1 to 2 digits: 10” x 8” panel
is required, see Diagram 3. For an address of 3
digits: 14” x 8” panel is required, see Diagram 4.
QUARTER-SECTIONS & ACREAGES, DIAGRAM #1 SUBDIVISION LOTS, DIAGRAM #3
QUARTER-SECTIONS & ACREAGES, DIAGRAM #2 SUBDIVISION LOTS, DIAGRAM #4
SIGN INSTALLATION, DIAGRAM #5
WHERE DO I INSTALL MY SIGN?
Signs shall be placed within 6.1 metres (20 feet)
on either side of the shoulder of the driveway
(approach) and located 1 metre (3.3 feet
from the property boundary, either within the
property boundary or within the road right-of-
way boundary. The sign shall be no lower than 1
metre (3.3 feet) from ground level (measured from
bottom of sign) and no higher than 2 metres
(6.6 feet) from ground level (measured from top
of sign), see Diagram 5.
Visit the County website at LSAC.ca for additional
information, or contact the County directly.
Community
33.