Super spotter consumables
Pneumatic sand blaster
SlimPOWER mini-pneumatic die grinder, straight
• Usable in connection with the super spotter
• For the reinforcement of the car body
• Copper coated
• Ideal for specific working
• With integrated storage tank 600 cm³
• Suitable for blasting material grain size 46-100
• Suitable for quartz sand, glass beads, plastic granulate,
aluminium oxide, standard corundum and glass granulate
• Supply for blasting material can be switched off and therefore
also be used as normal pneumatic guns
• ABS tank
• Robust steel handle
• Steel nozzle, maintenance-free
• Straight design
• Air exhaust through the handle rear end
• For one handed operation with ergonomic design
• For HM mills, mini cutting discs and grinding heads with a 6
mm shaft
• Ideal for grinding, polishing and engraving work
• For working in hard to access areas
• Very handy and compact construction
• Secure operation lever with locking device
• With stepless speed regulation
• Vibration dampened
• Very compact construction
• Includes 1/4” coupling connector
• Robust housing
Application range: Paint stripping, paint removal, rust removal, cleaning, surface cleaning
500.8574
Welding nail, 100pcs,
2x50mm
Welding nail, 500pcs,
2x50mm
Welding nail, 100pcs,
2.5x50mm
Welding nail, 500pcs,
2.5x50mm
Washer, 100pcs, 8x16mm
Triangular-washer 2.5 x 50.0 mm copper
coated 100pcs
Rivet, 100pcs, 3x3.2mm
500.8575
Rivet, 100pcs, 3x4.5mm
40
Noise performance level:
95 dbA
500.8576
Rivet, 100pcs, 5x8.2mm
40
Noise pressure level:
81 dbA
500.8579
Screw, 100pcs, M4x16mm
140
Air consumption:
319.93 l/min
Min. tube diameter:
1/4” - 6,4 mm
500.8570
500.8571
500.8572
500.8573
500.8592
500.8595
140
660
210
Technical data:
1150
Chuck:
6 mm
Capacity:
230 Watt
500
No load current:
25000 r.p.m.
30
Vibration:
< 1,5 ms²
160
Technical data:
Operating pressure:
Operating pressure:
max. 5,5 bar (80 psi)
Air consumption:
200 l/min
Connection thread:
1/4”PT
Min. tube diameter:
3/8” - 10 mm
Connection thread:
SURFACE TREATMENT
max. 6,3 bar (90 psi)
1/4”NPT
Magnet protector set
35.0
515.5030
• Suitable for protecting door edges and trims
• Ideal for polishing, painting and grinding
• Flexible use thanks to flexible magnetic film
• Surface made from rugged special plastic
• Easy to use
515.1909
260.0
280.0
5,0
123.0
1.30
Mini pneumatic die grinder, straight
Pneumatic pencil grinder, 70.000 rpm
• Straight design
• Air exhaust through the used air tube
• Ideal for carbide, corundum and tungsten carbide burrs
• For working in hard to access areas
• Very handy and compact construction
• Suitable for different repair works
• With stepless speed regulation
• Vibration dampened
• Cold insulated handle
• Includes 1/4” coupling connector and chuck wrench
• Aluminium housing
Technical data:
• Straight design
• Air exhaust through the handle rear end
• For one handed operation with ergonomic design
• For HM mills, mini cutting discs and grinding heads with a 6
mm shaft
• Ideal for grinding, polishing and engraving work
• For working in hard to access areas
• Very handy and compact construction
• Secure operation lever with locking device
• With stepless speed regulation
• Number of revolutions adjustable through regulating screw
• Vibration dampened
• Cold insulated handle
• Includes 1/4” coupling connector
• Ultra light robust housing from special plastic
Tube length:
No load current:
25000 r.p.m.
< 2,5 ms²
Vibration:
< 0,1 ms²
86 dbA
Noise performance level:
95 dbA
Noise pressure level:
74 dbA
Noise pressure level:
82 dbA
Air consumption:
140 l/min
Air consumption:
85 l/min
Operating pressure:
max. 6,3 bar (90 psi)
Operating pressure:
max. 6,3 bar (90 psi)
Min. tube diameter:
1/4” - 6,35 mm
Min. tube diameter:
3/8” - 10 mm
Connection thread:
1/4”PT
Connection thread:
1/4”PT
Technical data:
51
80
250 Watt
70000 r.p.m.
Noise performance level:
903.1042 Magnet protector, large, 15