International Dealer News IDN 139 October/November 2017 | Page 40
PRO GuIDe
High quality Matris “entry level” options
Italian suspension specialist Matris is well
known for its top-end products with
advanced features and high-tech
components. However, the company also
offers what is calls its “entry level” line – a
programme that doesn’t compromise on
quality or precision engineering, but offers
a start point pathway for those looking to
upgrade the handling of less expensive
motorcycles.
The M46KD is an easy to use and adjust rear
shock for naked and road bikes, that allows
the road user to get the right set-up.
Computerised engineering systems are used
to design, test and produce all the
components, and as with all Matris products,
“only materials of high-end technical and
mechanical characteristics are used,” says
founder and owner Alberto Turcato.
“Our M46KD features high-precision machining
with the objective of reducing weight and friction to
offer a basic range of shocks to improve comfort,
safety and performance, but still with the
characteristic ‘Matris look’.
“It is a fully rebuildable and fully revalvable single-
way mono shock with adjustable rebound; the
cylinder has an inner pressurised nitrogen gas (N2)
expansion tank with full floating piston for gas/oil
separation and a spring in alloy steel that is available
in different rates based on the bike and load.”
It is also available with up to 9 mm ride height
adjustment for a customisable setting and
supplied as standard with spring preload by
millimetric rings; up to 7 mm adjustable
spring preload also available.
Also in the Matris “entry
level” offer, the F15K
hydraulic fork cartridge
kit completely replaces all the
existing fork internals. It allows
modification of a conventional
non-adjustable fork into a fully
adjustable fork, offering spring
preload, compression and
rebound
asymmetric
adjustments, as in a sports fork
type, for a greater custom setting.
Alberto says that “it can be set up much
more accurately for each rider, making
the fork more precise, more adjustable,
and easier to use … better in every respect.
No modification of the original fork is required for
assembly, and the kit is completely serviceable for
proper and regular maintenance.”
The 20 mm diameter fork cartridge cylinder and 12
mm piston are made in aluminium alloy with a
lapping and hard oxidation surface treatment. The
anti-cavitation compression and rebound valves are
machined from billet aluminium and have their own
dedicated shims set for total control of hydraulic
flow.
Finally, in the Matris “entry level” upgrade offer,
their SDK steering damper with adjustable “speed
sensitive” progressive hydraulic damping system
“improves the control of the front axle, damping
all the oscillations and the rapid setting
changes.”
Features include twin tube system with outer
titanium cylinder and aluminium alloy coaxial
internal cylinder and high tensile alloy steel
piston rod with hard chrome coating. The
external tank for controlled heat compensation
of fluid expansion is pressurised with nitrogen
gas (N2) for greater stability at high operating
temperatures.
PARTS AND ACCESSORIES
EXHIBITOR
Hall 11
C10
MATRIS S.R.L.
Camisano Vicentino (VI), ITALY
Tel: +39 0444 411636
[email protected]
www.matrisdampers.com
MT-07 accessories
Well known German accessory manufacturer
Fehling offers dealers access to one of the
largest handlebar, luggage carrier system
and engine protection ranges in the
industry.
Seen here is a selection from Fehling’s
extensive range of options for Yamaha’s
popular MT-07 – upper and lower engine
protection guards, side bag holder and rear
luggage rack – all in steel, in black.
Also shown here are model-specific
accessories for Yamaha’s XV 950 Racer – a
side bag holder, rear luggage rack and 38
mm one-piece extra large engine protection
guard – also all in black.
Fehling design and make all their own
employs around 25 people and is still in the
ownership of the founder's family.
products in-house at their factory near
Dortmund in Germany. Founded in 1945 as a
metal forming and processing engineering
business, the company specialises in
motorcycle parts for most popular current
(and older) makes and model, currently
ERNST FEHLING GMBH & CO
Wickede (Ruhr), GERMANY
Tel: +49 (0)2377 2033
[email protected]
www.fehling.de
From track to street with Bonamici
Genuinely race-bred and CNC-machined from single
blocks of high-grade, lightweight aluminium alloy,
Italian specialist Bonamici’s accessories are among
some of the best designed top-end quality part