INDUSTRIAL SAFETY
Insulated electrical protective glove
Insulated electrical protective glove
• Dielectric latex gloves
• Insulated to DIN EN 60903
• With anatomical fit
• Anti-allergy treated
• With straight edge
• UV-resistant packaging
Work protective hardhat
• Dielectric latex gloves
• Insulated to DIN EN 60903
• With anatomical fit
• Anti-allergy treated
• With straight edge
• UV-resistant packaging
• DIN EN 397
• Special plastic
The use of glove liners is recommended for absorbing skin
moisture and for better ventilation.
The use of glove liners is recommended for absorbing skin
moisture and for better ventilation.
Attention: Over-gloves are necessary for mechanical protection!
Attention: Over-gloves are necessary for mechanical protection!
117.1608
117.1663
9
0
400.0
215
117.1662
1,0
10
0
400.0
215
117.1762
2,0
10
0
410.0
1,0
9
00
410.0
168
117.1757
1,0
10
00
410.0
189
9
360.0
10
360.0
215
2,0
1
10
360.0
250
117.1661
117.1133
2,0
3
10
410.0
690
117.1134
2,5
4
10
410.0
890
Pull-on gloves for electrician’s protective gloves
• Waterproof
• Treated with silicone
• Leather gloves for dielectric gloves
• Velcro fastening on the back of the hand
• Split leather cuff
• For protecting against mechanical risks
• Full-grain calf leather
Pneumatic electrician protective glove tester
• For the testing of insulated gloves
• Always carry out before starting work
175.0
370
225.0
175.0
370
290.0
225.0
175.0
370
215
0
470
117.1756
0
1,0
117.1132
1,0
1,0
117.1664
Electrosoft
Class
225.0
290.0
117.1610
Electrosoft
Class
290.0
117.1609
Electrician’s face shield
• DIN EN 397
• Fault arc tested to DGUV GS-ET-29, test level W(LBP) = 158
kJ (corresponds to prospective test short-circuit current 4
kA/0.5 s) EN 166
• Personal eye protection equipment
• Natural rendering of colours thanks to transparent, non-tinted
visor
• Colour rendering index > 90%
• Light transmission: > 88%
• Suitable for standard electrician’s hardhat
• Face shield for 117.1608-117.1610
Caution: This insulating-glove cover is required for mechanical
protection (rubbing, cuts, pricks) in conjunction with dielectric
gloves!
117.1780
117.1666
110.0
140.0
800
Protection pocket for electricians gloves
117.1560
10
320.0
175
Under gloves
• Made out of fine mutton cloth
180.0
200.0
200
278
Electrician’s face shield
• Belt pocket made out of canvas
• For the storage and protection of the electricians gloves
117.1665
class 1
117.1660
260.0
225
• DIN EN 166
• Fault arc tested to DGUV GS-ET-29, test level W(LBP) = 318
kJ (corresponds to prospective test short-circuit current 7
kA/0.5 s) EN 166
• Personal eye protection equipment
• Also fault arc tested to ASTM F2178, ATPV: 7.0 cal/cm²
• Natural rendering of colours thanks to transparent, non-tinted
visor
• Colour rendering index > 90%
• Light transmission > 70%
• Suitable for standard electrician’s hardhat
• Anti-mist protective gel supplied
117.1796
class 2
525
430
GD_KP_$KT-K14-$KP-AUTO-HYBRID_#SALL_#APR_#V1.indb 430
27.03.2015 12:29:02