HSE International ISSUE 111 | Page 34

MRS TRAINING & RESCUE Every year hundreds of accidents and incidents are recorded as a result of working at height activities. Falls from height are one of the biggest causes of workplace fatalities and major injuries in the UK. In 2015/16, figures show there were: ▪ ▪ ▪ 37 fatalities – 26% of all fatalities at work in UK 5956 non-fatal injuries Someone injured by falling from height loses on average 9.4 days from work How do you decide if someone is ‘competent’ to work at height? Employers should make sure that people have the necessary skills, knowledge and experience to perform the task, or, if they are being trained, that they work under the supervision of somebody competent to do it. Working safely at height may not require the use of complex equipment and procedures as a suitable solution, and you should take a sensible approach when considering precautions for working at height. There may be some low- risk situations where common sense tells you no particular precautions are necessary and the law recognises this. There is a common misconception that ladders and stepladders are banned, but this is not the case. There are many situations where a ladder is the most suitable equipment for working at height. Work at height means work in any place where, if there were no precautions in place, a person could fall a distance liable to cause personal injury. Some workplaces are fairly obvious, such as working on a roof or ladder, whereas others may be less obvious - if you fall into a hole in the ground, for example. Employers and those in control of any work at height activity must make sure the work is properly planned, supervised and carried out safely. This includes using the right type of equipment for working at height and ensuring that any people engaged in the work are ‘competent’. 34 HSE INTERNATIONAL Before working at height, you must work through three simple steps: ▪ ▪ ▪ Avoid work at height where it is reasonably practicable to do so; Where work at height cannot be avoided, prevent falls using either an existing place of work that is already safe or the right type of equipment; Minimise the distance and consequences of a fall, by using the right type of equipment where the risk cannot be eliminated.