Sub-q
Administration Instructions
Step 1 - prepare area/lay out supplies
Clean your work area with
alcohol or disinfectant soap
and water. Verify that you
have the correct supplies,
including the tubing set,
needle set, and syringe size
recommended by your
healthcare provider, and lay
them on a clean surface.
Step 2 - wash hands
Wash hands thoroughly and, if required, put on disposable gloves.
Step 3 - fill syringe
Be sure the product is at room temperature before you begin filling the
syringe with your required dose.
Refer to the manufacturer's instructions, or ask your provider for more
detailed filling instructions.
Step 4 - verify tubing and needles
Again, verify that you
are using the correct
tubing and needles
recommended by your
healthcare provider
and prescribed by
your doctor.
Step 5 - attach syringe, tubing and needles
Remove sterile cap from the luer disc end of the Precision Flow Rate
Tubing™ set and connect tubing to the syringe. Remove sterile caps
from the ends of the HIgH·Flo needle set and Precision tubing set.
Connect the sets together, using care not to contaminate the ends.
12
Beuse
sure
tocomplete
use the complete
Be sure to
the
protocolp