BEFORE AND AFTER
The removal of paint was thorough, while leaving the metal unharmed.
The logo is still in the bolt. These pictures are intended to demonstrate
the system’s blasting abilities. If this would have been used on an
actual restoration, we would have used a more aggressive media on
the heavily corroded screw or replaced the hardware with new. But for
blasting parts that will be reused, the Small Job Soda Blasting System
should prove very useful for lots of jobs.
ADJUSTING
AND SERVICING
THE GUN
The kit includes different nozzles for a narrower or
wider blast pattern. It also includes an Allen wrench,
which you’ll need to change nozzles. Loosen the
front Allen screw and the nozzle comes out. Loosen
the rear Allen screw and the front of the gun comes
off, allowing access to the air jet.
SOURCE
Eastwood Company | (800) 343-9353 | www.eastwood.com
88 FOXMustangMagazine.com