1
2
1
The door trim is comprised of two
pieces — a long piece and a short
section at the front. To remove
the long piece, remove the Philips
screw. Have a container for all takeoff parts.
2
With the retaining screw removed,
slide the piece rearward an inch or
so, aligning the slots in the trim with
the nylon retainers riveted to the
door. Now the piece can be slid away
from the door.
3
3
The short piece is held on by two
threaded studs and a molded-on
plastic clip at the front. You’ll have to
remove the door panel for access to
the studs and nuts.
4
5
4
To remove the windshield wipers, slide the
pin out at the base of the wiper arm. It may
move with finger effort, or it may take a
tool to persuade it.
5
With the tab moved, the wiper arm
can be pulled off. You may need to
rock it back and forth.
Issue 7 FOX Mustang Magazine 71