1
2
VAG front mask guiding and stub rods set
VAG Engine support socket set, extra short
Bit socket for spline (XZN®) screws, long
• For moving the front mask (radiator support) forward in order
to carry out service work
• Allows for timing belt changes or the renewal of the water
pump
• Removes the need for the adjustment of the bonnet lock and
the gap measurements
• 12-point
• For the assembly and removal of the aluminium engine
support (hard to reach sites)
• Ideal for timing belt change
• Internal square drive to DIN 3120 / ISO 1174 with ball
reception
• Extra-short design
• For manual operation
• Matt finish
• Chrome vanadium
• Ideal for releasing and tightening of the securing screws of the
high-pressure pumps, timing belt wheels, e.g. when changing
timing belt
• Spline (XZN®)
• Internal square drive to DIN 3120 / ISO 1174 with ball
reception
• Long design
• With press fitted nickel plated insert bit
• For manual operation
• Matt finish
• Chrome vanadium
Please carry out an up-to-date cross reference test for the
specific vehicle on www.timingtools.de
Application range: For timing belt change on Volkswagen
Golf IV, Audi, Škoda, Seat etc.
Application range: Audi, Seat, Škoda and Volkswagen with
TDI Common Rail engines, engine code: CAAA, CAAB, CAAC,
CAYB, CBAA, CBAB, CBBB etc.
Please carry out an up-to-date cross reference test for the
specific vehicle on www.timingtools.de
3
4
5
6
7
8
9
911.1295
2 pcs
VAG Engine support socket set,
extra short
110
10
consists of:
400.2075 6 pcs
VAG front mask guiding and stub
rods set
911.1293 12 point socket, 16.0 mm short
749
40
911.1294 12 point socket, 16.0 mm long
911.1353
M10
22.0
110.0
72.0
11
112
67
VAG Bit socket for hexagon screws, extra long
Hexagon socket, long for pulley wheel
consists of:
X
150.3012
2
VAG front mask push back
170
400.2077
1
Front mask removal aid (2)
80
400.2078
1
VAG front mask removal aid (2)
120
• Suited for the assembly and disassembly of the pulley wheel
vibration damper, e.g. when changing the timing belt
• 6-point
• FlankTraction-Profile
• In accordance with DIN 3124 / ISO 2725
• Internal square to DIN 3120 / ISO 1174 with ball reception
• Long design
• For manual operation
• Matt finish
• Chrome vanadium
12
• Hexagon socket with ball head
• For releasing and tightening the TDC sensor
• Internal square drive to DIN 3120 / ISO 1174 with ball
reception
• Extra-long design
• For manual operation
• Matt finish
• Chrome vanadium
13
14
Application range: VAG models from 2005, 4-cylinder 2.0l
diesel engines
15
Application range: Audi, Seat, Škoda and Volkswagen
Please carry out an up-to-date cross reference test for the
specific vehicle on www.timing ѽ