Electrical Contracting News (ECN) June 2017 | Page 58
COMPANY
SHOWCASE
SPONSORED STORIES FROM THE INDUSTRY
EUROPA COMPONENTS – THE COMPLETE RANGE OF
CONTACTORS AND ACCESSORIES FLUKE OFFERS MONEY SAVING CLAMP METER AND 2-POLE
TESTER KIT WITH FREE TOOLBAG
Contactors and related accessories form a major
part of Europa’s expansive range of control gear.
Over 350 products make up this sector with
contactors primarily supplied by C & S Electric.
The main TC1 range of AC contactors
includes 3- and 4- pole options, with current
ratings from 4kw/9A up to 45kw/95A and AC coil
voltages from 24V up to 415V. A TP1 DC range of
3 pole contactors has a similar spread of ratings,
but with DC coil voltages from 12V to 110V.
IP54 metal clad and Fibox IP67 polycarbonate
enclosures are available separately, whilst
4-pole contactors pre-assembled in metal
enclosures also feature in the range. Finally, a
wide range of accessories includes overload and
control relays, auxiliary contact blocks, TC delay
contacts, AC coils and more.
Recognising this is a complex sector, Europa offers priority technical support –
via a dedicated helpline, 01582 692444, or email [email protected] Until 30th June 2017, Fluke is offering
a 325/T150/C550KIT, a money saving
starter kit for electricians. The kit
comprises a Fluke 325 clamp
meter and a Fluke T150 2-pole
tester, with a combined saving of
15 per cent on buying the products
separately, plus a free sturdy steel
framed Fluke C550 toolbag.
The Fluke 325 clamp meter
is engineered to produce noise free, reliable measurements in the toughest
environments. Designed to be long lasting and easy to use, it features a slim,
ergonomic design for comfortable all-day use with a large, easy to read, backlit
display and with CAT III 600V/CAT IV 300V safety ratings.
The Fluke T150 is the high end member of a family of rugged 2-pole testers
offering fast test results, and built with state-of-the-art measurement and safety
technology, with large, easy to use buttons, bright backlights, and clear audible and
physical indicators designed for any work situation.
For further information visit: www.europacomponents.com
SLIM, BRIGHT AND POWERFUL FROM GREENBROOK
GreenBrook’s new
Lynx range of LED
slimline floodlights
offer a high quality
finish with an elegant
design die-cast body
and tempered glass.
The range consists of
10W – 100W fittings
in black or white, with
or without PIR – all with
a beam angle of 120° and
a lumen output of 100lm/W. All are
rated IP65 and ideal for installation in both domestic
and commercial properties.
For maximum electrical safety, the electronics inside have been encapsulated for
additional protection. Manufactured with an LED array instead of a single chip allowing the
powerful light to spread and appear less intense to the eye. Also fitted with cooling fans to
assist heat dissipation and increase the life expectancy of the product.
Easy to install and an ideal low energy alternative to a Xenon flood – these sleek fittings
have a mounting bracket that allows the product to rotate 360° so it can be positioned
easily at the required angle.
For further information visit: www.fluke.co.uk/promotions
TE CONNECTIVITY INTRODUCES A NEW, EASY TO INSTALL
GROUNDING SOLUTION FOR INDOOR LIGHTING
TE Connectivity (TE) has introduced the Ground Clip cable assembly, a quick and
reliable way to ground equipment in applications such as lighting fixtures, HVAC
equipment and signage.
A grounded light fixture helps provide safety when a wiring circuit malfunctions
by ensuring that the fixture will not carry electrical current that can harm an
individual. TE’s Ground Clip assembly allows for fast and easy installation due to a
design that virtually eliminates the need for fastening ground lead terminals with
screws or bolts. The clip area of the terminal is designed to suit a wide range of
conditions as it attaches to both painted and bare
panels ranging in thickness from 0.48mm to
1.8mm. The cable assembly also works with either
aluminium or steel panels.
The grounding clip terminal comes with a
pilot hole in the clip area that allows the option of
permanent installation using a sheet metal screw.
It accepts 0.75mm² (18AWG) stranded wire and
is available in stainless steel. The cable is readily
available in fixed lengths or can be customised
upon request.
For further information visit: www.te.com
For further information visit: www.greenbrook.co.uk
LIGHT EFFICIENT DESIGN UK OFFERS DIMMABLE LED HID
RETROFITS FOR POST TOP RELAMPING
Light Efficient Design has announced the LED 8085 60W retrofit
lighting solution for fast, non-invasive replacement of 250W HID
post top lamps.
Significant LED energy savings are increased with the
dimmable external driver which can be mounted up to
20m from the lamp. Two colour temperatures – 5,700K or
4,200K – are available.
A unique ‘rugby ball’ shape mimics that of traditional
HID post top lamps to ensure that a consistent look is
maintained, especially useful d