Edition 8 - Page 150

ELECTRICAL ELECTRICAL Chargers & Control Panels Battery Voltage Meter Control Panel EC30 EC10 The EC10 Battery Voltage Gauge Panel incorporates a clear, easy to read digital display. This is operated by using the in-built on/off switch and has a range of 9v – 14.5v. Sargents AC50Z Control Panel Control Panel AC50Z EC20 The EC30 Control Panel comprises 3 x 10a 12v switched fused outputs including pump and lights. The battery select switch allows the use of either the leisure or vehicle batteries. Also incorporated is a digital voltmeter display with on/ off switch. The EC20 Control Panel features a battery selection switch that allows you to choose the use of either the leisure or vehicle battery. Also included is 1 x 10a 12v switched output and a digital voltmeter display with on/off switch. The AC50X control panel is laid out in an intuitive manner so that you can access information and operations easily. It has an easy to use switch design to control Power, Entry Light, Water Pump, and to read the battery level. This panel requires a seperate relay to turn the leisure power on/off. EC155/EC50 & EC155/EC51 Complete Kits K155A (EC155/EC50 Complete Kit) K155B (EC155/EC51 Complete Kit) The EC155 / EC50 Electrical Kit is specifically designed for customers that are building their own motorhome or caravan conversion. If you have a one off build or are a small to medium manufacturer then this would be the perfect choice for your requirements. The EC155 / EC51 Complete Electrical Kit is specifically designed for customers that are building their own motorhome or caravan conversion. If you have a one off build or are a small to medium manufacturer then this would be the perfect choice for your requirements. The kit contains a compact EC155 power supply unit and an easy to use EC50 control panel that is connected via a 2 metre length control lead. The DIY harness simply plugs into the EC155 unit and provides the available 230V and 12V inputs and outputs for you to terminate into. Kit contents: • EC155 Power Supply Unit • EC50 Control Panel • 5 metre length Control Lead • EC155 DIY 230V & 12V Harness The kit contains a compact EC155 power supply unit and an easy to use EC51 control panel that is connected via a 2 metre length control lead. The DIY harness simply plugs into the EC155 unit and provides all of the available 230v and 12v inputs and outputs for you to terminate into. Sargents Supercharge 151 SC151 The Supercharge 151 is a 150w battery charger/ converter. It comes complete with a short mains input cable and DC output cable to connect to the 12v system. It has a built-in blocking diode to prevent discharge of the battery by the charger electronics. Also included are the fresh and waste water sensor harnesses, both connect directly onto the back of the EC51 control panel to show the levels of the fresh water tank, and indicates when the waste tank is full. You have the option of using one or both tanks. Kit contents: • Waste Water Harness • EC155 Power Supply Unit • Fresh Water Harness • EC51 Control Panel • Waste Tank Sensor • 2 Metre length Control lead • Fresh Tank Sensor Kit. • EC155 DIY 230v & 12v Harnesses Power Supply Unit Vertical Power Supply Unit Horizontal EC160V (Black) EC160 (Black) EC160VSV (Delux Silver) EC160SV (Delux Silver) The EC160 Power Supply Unit features a 230v AC 16a input via a pre-wired lead, RCD protection and 3 x 10a MCB outputs via quick fit connector blocks. There is a 150w 13.9v battery charger with on/off switch and 5 x 10a 12v fused outputs (auxiliary/lights and pump are switched) via screwed terminal blocks. Also built in to the unit are: split charge relay, EMC isolation relay, digital voltmeter with on/off switch and a reverse polarity indicator. 150 SALES HOTLINE: 01283 586060 sales@miriad-products.com OEM HOTLINE: 01283 586007 oemsales@miriad-products.com