MADE IN THE USA. SINCE 1980
Ladder Bars
STAGE III KIT
Ladder Bar Suspension and Subframe
3628 Complete ladder bar subframe with Strange
all aluminum coil overs (unwelded) $1,429.84
NOTE: Rear end housing not included. Fabricated 9” and Dana housings available.
Available welded or unwelded.
STAGE II Kit
Ladder Bars with Shocks and Springs
• Adjustable Pro 1ladder bars
• Mandrel bent 2” x 3” x .083”
or .120”frame rails
• Housing brackets & bracket
boxing strips
• Shocks, springs
• Adjustable Pro 1ladder bars
• Ladder bar cross member and brackets
• Diagonal link
• Hardware and detailed instructions
• Shocks, springs
• Upper shock cross member
• 2” x 3” ladder bar cross member • Upper shock cross member • Housing brackets, 1/4” thick • Lower adjustable shock mounts
& brackets
• Adjustable lower shock mounts • Bracket boxing strips
• Diagonal link • Hardware and detailed instructions 3634 Stage II ladder bar suspension with Strange aluminum
Outlaw “TRIPLE” Adjustable Ladder Bars
The ultimate ladder bar for heavy, high horsepower race cars. 360 degree housing
brackets w/integrated shock mounts. Lightweight Chromoly construction for strength.
Includes all rod ends, hardware and brackets.
3606 Outlaw adjustable ladder bar kit $569.95 pr
3606A Outlaw adjustable ladder bar weld-up kit $544.95 pr
coil overs $1,044.40
STAGE I KIT
Ladder Bar
• Adjustable Pro 1 Ladder Bars
• Ladder Bar Cross Member and Brackets
• Diagonal Link
3627 Stage l ladder bar suspension with 1-3/4” round cross
member $487.75
Add $22.00 for panhard bar
32” Double Adjustable PRO 1 Ladder Bars
Easily installed and tuned for maximum traction, ladder bars
can be installed on virtually any car with tremendous results.
As with most of our suspension components, our ladder bars
carry the Chassis Engineering lifetime limited warranty!
3607 32” Double adjustable Pro 1 ladder bar $330.70 pr
• Housing Brackets
• Bracket Boxing Strips
• Hardware and Detailed Instructions
Ladder Bar Crossmembers
Chassis Engineering offers a complete line of ladder bar cross members. The 1/4” thick, laser cut, profiled brackets
offer 5 holes of adjustment to dial your car in correctly. Round tube cross members are offered in 1-3/4” x .134 mild
steel and 1-5/8” Moly. Rectangular cross members are 2” x 3” x .083 and .120 wall thickness.
3819
Fabricated 9” Rear End Housing
Housings available in mild steel or chromoly from bare housing to complete rear
ends. See our website for ordering spec sheet or call one of our techs.
3718
3718 Ladder bar cross member, round 45” $ 72.19
3719 Ladder bar cross member, round 60” $ 72.19
3719C Ladder bar cross member, 1-5/8” Moly $155.87
3819 Ladder bar cross member, 2” x 3” x .083”, 60” $113.14
3818 Ladder bar cross member, 2” x 3” x .120”, 60” $113.14
Economy Spring Over Shock
A low cost alternative to the more expensive coil-over systems, these coil spring
mounts provide many of the same benefits at a fraction of the cost. These kits are
ideal for street rods and Pro Streeters. Delivered complete with upper mounts,
adjustable lower mounts, shocks, springs, hardware and complete instructions.
5076 Coil spring and shock mounts $311.80 pr
Mild Steel – 3” x .250” axle tubes standard
4225 56” wide with housing ends not welded $664.95
4226 Any width with housing ends welded $734.95
4227 Any width with housing ends & back brace welded $884.95
Complete with brackets shown. Call for pricing.
Call for Moly pricing.
Ladder Bar Safety Brackets
Some kind of front retaining device is required on
ladder bars by all sanctioning bodies. Our simple kit
will make you legal and give you peace of mind. Kit
includes all necessary brackets and hardware to add
safety retainers to any ladder bar.
Ladder Bar Adjusters
Build your own ladder bars or convert your old
non-adjusting ladder bars to adjustable by simply
adding our adjuster kit. Contains two adjusters with
3/4” thread, jam nuts and wrench flats.
3610 Ladder bar adjusters $31.50
3612 Ladder bar safety brackets $32.45
3636 Front ladder bar bolt kit $ 8.53
Driveshaft Safety Loops
Some kind of driveshaft loop is required by all sanctioning bodies
to contain the driveshaft in the event of U-joint or driveshaft failure.
Chassis Engineering has more different loops for more applications
than anyone. All loops guaranteed to pass tech. Visit our website
for a complete list of available sizes.
From $14.15
TRACK
TESTED
ROD END SAFETY BRACKETS
LOWER ADJUSTER LINK (Standard)
4035
4037
RACE
PROVEN
Leaders in chassis technology for over 35 years
Toll Free Ordering: 800-327-9402 / Info & Tech: 561-863-2188
Browse our entire product line @ chassisengineering.com