DIAG IM3 - Page 231

Tel +44 0845114 130258 9596 8530info@vetinst.com info@vetinst.com Dental Equipment Surgical &Power Instrumentation Equipment15 7 K210 Hi Torque Large (6.25mm) Jacobs Chuck K220 Blades K210 Hi Torque 6.25mm Chuck Attachment £901.25 K154 K152 K144 K155 Actual Size K107VI & K108VI Keyless Chuck Attachment K148 Actual Size K210VI Actual Size K210 HI TORQUE LARGE (6.25MM) CHUCK Actual Size Using the standard chucks the MiniDriver has a torque of 0.78 Newton Meters, which makes heavy weather of driving large pins without predrilling. By adding a set of gears the chuck speed is reduced but the stall torque is increased to 2.8 Newton Meters ideal for driving pins. K142 Other patterns available K220 BLADES CODE K141 K142 K144 K146 K147 K148 K149 K152 K154 K155 Chuck Keys wear quickly, become lost and can be awkward to use in some situations. The Keyless Chuck, as are found on most DIY drills allow the surgeon to quickly switch drills and pins without a key. The distal part of the Chuck is held using fingers and the chuck opened or closed by engaging the drill in either the forward or reverse drive respectively. The downside is that the Chuck is slightly bulkier than the keyed equivalent. K108VI & K107VI KEYLESS CHUCK ATTACHMENTS K108VI K107VI Keyless Chuck Attachment 0 - 3.2mm Keyless Chuck Attachment 0 - 6.3­mm £592.25 £592.25 CUT THICKNESS 1.0mm 1.0mm 1.0mm 0.65mm 0.65mm 0.65mm 0.65mm 0.65mm 0.65mm 0.65mm LENGTH 14.2mm 30.0mm 30.0mm 27.4mm 27.4mm 27.4mm 42.7mm 30.0mm 42.7mm 42.7mm WIDTH 6.4mm 6.4mm 10.2mm 19.0mm 14.0mm 9.5mm 19.1mm 6.4mm 9.5mm 14.0mm PRICE £59.23 £59.23 £59.23 £59.23 £59.23 £59.23 £59.23 £59.23 £59.23 £59.23 ‘Samoy Rapid-Cut’ Saw Blades K114B AO Quick Release Attachment Named after Yves Samoy, the surgeon responsible for developing the TTA Rapid technique, the titanium nitride on the ‘Samoy Rapid-Cut’ signature series makes for a very hard cutting surface for a blade that will stay sharp much longer than standard blades. SAMOY RAPID-CUT SAW BLADES SAMOYMINID1 SAMOYMINID2 Many drills and taps are available with a quick release fitting, the most common of which is to the Synthes or AO standard. Drills may be changed quickly without the use of a chuck key. The original version was made from relatively soft aluminium. The re-manufactured K114B is made from stainless steel and is easier to use than the original. Actual Size K114B AO Quick Release Attachment £66.95 £66.95 K120 Blades K114B AO QUICK RELEASE ATTACHMENT K114BVI Samoy Rapid Blade for Minidriver 42mm x 14mm x 0.65mm (KI55) Samoy Rapid Blade for Minidriver 27mm x 9.5mm x 0.65mm (KI48) K124 K134 £561.35 Other patterns available - phone for full list K120 BLADES CODE K121 K122 K123 K124 K125 K131 K132 K133 K134 K135 215 CUT THICKNESS 1.0mm 1.0mm 1.0mm 1.0mm 1.0mm 0.7mm 0.7mm 0.7mm 0.7mm 0.7mm LENGTH 15.1mm 31.0mm 15.1mm 31.0mm 15.1mm 15.1mm 31.0mm 15.1mm 31.0mm 15.1mm WIDTH 6.4mm 6.4mm 10.4mm 10.4mm 16.5mm 6.4mm 6.4mm 10.4mm 10.4mm 16.5mm PRICE £59.23 £59.23 £59.23 £59.23 £59.23 £59.23 £59.23 £59.23 £59.23 £59.23