DIAG IM3 - Page 125

Tel +44 0845114 130258 9596 8530info@vetinst.com info@vetinst.com Dental Equipment & Instrumentation Internal Fixation15 3 Cannulated Drills Drill Bits 0.7mm and 1.0mm Use a 0.7mm Drill Bit for a Pilot Hole and a 1.0mm Drill Bit for Lag Screwing. At this size, these Drills are very delicate and most power tools are too heavy to provide adequate control to prevent breakages. Our Step Drills have the same shaft as our Cruciate Screwdriver Insert for use in our lightweight Modular Screwdriver. DRILL BITS 0.7MM AND 1.0MM 10MDB07 10MDB10 0.7mm Drill Bit 1.0mm Drill Bit £56.65 £56.65 Drill Stops For maximum control over the alignment of bone tunnels use of Cannulated Drills is preferred. A Fine Guide Wire is drilled through where the bone tunnel or screw hole is required. Only when the surgeon is satisfied that the guide wire is correctly positioned is the Drill driven along the Wire to create the hole. The Guide Wire can be repositioned if necessary without causing undue trauma to the bone. Available for Jacobs Chuck or AO Quickfit. Drilling to a pre-measured depth can be a challenge even with a ‘C’ arm! A more reasonably priced option is to use a drill stop which is tightened onto the drill bit at the required depth. The Set includes 4 Stops to cover all the standard drill sizes. CANNULATED DRILLS H090112CAN H090104CAN H090106CAN S090112CAN S090104CAN S090106CAN 090065 2.5mm 130mm long 1.1mm Cannulation 2.7mm 130mm long 1.1mm Cannulation 3.5mm 130mm long 1.1mm Cannulation 2.5mm 130mm long 1.1mm Cannulation AO Quickfit 2.7mm 130mm long 1.1mm Cannulation AO Quickfit 3.5mm 130mm long 1.1mm Cannulation AO Quickfit Guide Wire 1.1mm x 178mm (pack of 10) £77.25 £77.25 £77.25 £87.55 £87.55 £87.55 £29.36 2.0, 2.5, 2.7, 3.2, 3.5 & 4.5mm The stop is tightened onto the drill bit using the hex driver provided. DRILL STOPS DRILLSTOP Drill Stop Set in Stainless Case £98.00 Drill Case Mini Drill Bits - Dental Fit In stainless steel - hard. DRILL BITS - DENTAL FIT D090100 D090101 D090102 0.052 (dia in.) 1.1 (dia mm) £69.53 1.5 £72.10 2.0 £74.68 Folding Box to fit all the standard sizes of Drill. Ideal for autoclaves. Case has holes for 1.1, 1.5, 2.0, 2.5, 2.7, 3.2, 3.5, 4.0, 4.5, and 5.5mm Drills. DRILL CASE 090115S 090116 090115H 090117 090114AS 090117AS S090115 S090SET 109 Drill Box S/Steel Empty (for I/Q Drills) Drill Box S/S Complete with I/Q Drills (9) Drill Box for Hard Drills Empty Drill Box Complete with Hard Drills (10) Drill Box for Anti-Skid Drills Empty Drill Box Complete with Anti-Skid Drills (7) Drill Box for AO Drills Empty Drill Box Complete with AO Drills (10) £118.45 £180.25 £118.45 £245.00 £118.45 £262.65 £118.45 £325.00