DIAG IM3 - Page 117

Dental Equipment & Instrumentation Internal Fixation15 3 Tel +44 0845114 130258 9596 8530info@vetinst.com info@vetinst.com Adjustable Drill Guide Triple Drill Guides Triple Drill Guides are used to accurately position drills and ‘K’ or arthrodesis wires. The three holes in the head allow for the placement of parallel anti-rotation wires. TRIPLE DRILL GUIDE/SLEEVES SLG1115 SLG0020 SLG0025 Double Drill Guide/ Sleeve for 1.1 & 1.5mm Drills 100mm £130.00 Triple Drill Guide/ Sleeve for 2.0mm Drills 115mm £120.00 Triple Drill Guide/ Sleeve for 2.5mm Drills 115mm £120.00 Drill Guide 0.7mm/1.0mm Our Adjustable Drill Guide allows accurate placement of drill holes by predetermination of drill entry and exit points. Locks onto bone to minimise errors. • The swivelling point allows use of the guide where access is limited. • Supplied with 2.0, 2.5 and 3.5 Drill Sleeves. Use the appropriate Sleeve for the Drill in use. Due to the size limitations, this device serves only as a drill guide and cannot be used as an insert sleeve or tap guide. • A scale on the instrument measures hole depth. DRILL GUIDE 0.7MM /1.0MM • Applications include condyle fractures, femoral neck tunnels and screw holes, ununited anconeal process. CDTIS10 In our view this design has significant advantages over ‘CEG’ and ‘C’ guides. DRILL GUIDES & INSERTS ADJDG2035 ADJDG45 ADJSL55 Adjustable Drill Guide for 2.0/2.5/3.5mm Drills 175mm Adjustable Drill Guide 4.5mm Drills 190mm Slider to fit 5.5 Cortical (equine) Screws fits ADJDG45 75mm £205.00 £205.00 £75.00 Drill Guide 0.7mm/1.0mm £120.00 Self-Centring Drill-Guides Whether it be for external fixation or screw application, it is desirable for implants to be positioned fairly centrally into bones. Sized for the most popular drill-bits, these devices will help achieve accurate positioning of pilot holes. SELF-CENTRING DRILL GUIDES CDG11 CDG15 CDG20 CDG25 CDG32 CDGSET Drill Guides and Inserts CEG2735 The large end has an internal diameter which matches the clearance drill and tap. The small end has an internal diameter the same as the pilot drill and an external diameter which fits the clearance drill hole, ie. the same as an insert sleeve. This single instrument contains all the guides and sleeves you need to place a lag screw. Use of an appropriate sized Drill Guide enables the surgeon to control exactly the entry and exit points of drills. This ability is extremely important in lag screwing. COMBINATION DRILL, TAP & INSERT SLEEVE Various Insert Sleeves are available for each drill size, with an accurate guidance system, and provide exact positioning of holes for lag screwing, (e.g. for a 3.5mm Cortical Screw, Drill 3.5 lag hole in proximal cortex, insert SL3525 and drill through it into the trans cortex. Finally tap and insert Screw.) CDTIS20 CDTIS24 CDTIS27 CDTIS35 CDTIS45 SMALL DRILL GUIDE (DOES NOT INCLUDE INSERT SLEEVES) Small Drill Guide i/d 3.5mm ‘C’ Guide 135mm £82.50 LARGE DRILL GUIDE (DOES NOT INCLUDE INSERT SLEEVES) CEG4565 £95.00 £95.00 £95.00 £95.00 £9 5.00 £375.00 Combination Drill, Tap and Insert Sleeve CEG4565 CEG2735 Self-centring Drill-guide for Ø1.1mm Drill 10mm spread Self-centring Drill-guide for Ø1.5mm Drill 12mm spread Self-centring Drill-guide for Ø2.0mm Drill 14mm spread Self-centring Drill-guide for Ø2.5mm Drill 18mm spread Self-centring Drill-guide for Ø3.2mm Drill 23mm spread Set of 5 Self-centring Drill-guides Large Drill Guide i/d 6.5mm ‘C’ Guide 140mm £99.50 101 Combination Drill, Tap & Insert Sleeve for 2.0 Screws 100mm Combination Drill, Tap & Insert Sleeve for 2.4 Screws 105mm Combination Drill, Tap & Insert Sleeve for 2.7 Screws 110mm Combination Drill, Tap & Insert Sleeve for 3.5 Screws 115mm Combination Drill, Tap & Insert Sleeve for 4.5 Screws 130mm £120.00 £120.00 £120.00 £120.00 £120.00